neutral safety switch help... I know how to set up looking for a switch

[qnitro]

Hey guys, Im wanting to run a non GM, plastic stick Neutral Safety switch...I found a switch I thought would work here in the pics, the problem is its the opposite of what I need push down is off and not engaged is on(car starts).. Im running a 6 speed, I have the B&M micro dont like it.. what option do you guys use??

Thanks

Kevin

[dontlifttoshift]

Use another brake light switch.....and a relay.

[dhutton]

I have used the Lokar switch with good results but you will need to figure out where to mount it and make a bracket since it is more of a wipe activation than a push like the one you showed.

I've got one here that I can let you try to see if it will work for you.

Don

[Kenova]

I used a sealed momentary contact switch as a reverse light switch on my Hurst 4 spd. shifter. I would think something similar should work for your neutral safety switch. There are lots of choices out there.

Ken

[ccmc]

You can reverse the way your switch works with a relay. Google car alarm relay schematics.

[qnitro]

Ohhh thats a good one..

You can reverse the way your switch works with a relay. Google car alarm relay schematics.

[icemanrd19]

why not just a factory 69 neutral switch? thats what i used on my 67

[Richard454]

Like others said- add relay-

But in mine I added a bypass.

Sometimes - working on the car/on a hill- whatever- You don't have enough feet to push the clutch- brake and gas pedal-

So I added bypass- that will latch the neutral safety switch-

Turn on the ignition- push in the clutch-press the momentary switch- clutch safety switch is then bypassed till you- turn off the ignition OR push in the clutch again.

Richard