Results 1 to 5 of 5
Thread: art morrison camaro subframe
-
04-20-2017 #1
Registered User
- Join Date
- Jun 2006
- Posts
- 120
art morrison camaro subframe
Anybody know the length of the shocks on an art morrison camaro subframe? I bought a scott mock frame and trying to make it road worthy!
-
04-20-2017 #2
Registered User
- Join Date
- Mar 2008
- Location
- Chicago suburbs
- Posts
- 667
You mean extended vs collapsed?
-
04-20-2017 #3
-Moderator-
- Join Date
- Apr 2001
- Location
- Central CA USA
- Posts
- 6,108
Art Morrison made a change in upper shock mount height and width around 3 years ago. My 67 Camaro has the low, Mary's came with the higher mounts. I think it was due to them switching to the Strange shocks.
David Pozzi http://www.pozziracing.com67 Camaro RS that will be faster than anything Mary owns.
-
04-20-2017 #4
Registered User
- Join Date
- Jun 2006
- Posts
- 120
I need the extended length.mine are way too long , have to much travel and are the mounts are dangerous
-
04-22-2017 #5
-Moderator-
- Join Date
- Apr 2001
- Location
- Central CA USA
- Posts
- 6,108
Most shocks for the front will have 4" travel. Ride Tech makes a 4.1 that's we used.
Installed height for that shock is 12.5"
Extended Length: 14.23"
Compressed Length: 10.3"
Ideally, you should have a little more compression travel than rebound, the bump stop takes up some of the compression travel.
If you use a longer shock on a Art Morrison sub, the coil starts getting too close to the upper A arm & in droop, the upper ball joint will probably start binding.
Last edited by David Pozzi; 04-23-2017 at 02:21 PM.
David Pozzi http://www.pozziracing.com67 Camaro RS that will be faster than anything Mary owns.
-
Reply With Quote
