Bellhousing alignment

[charv712]

For anyone who shimmed their Bellhousing to achieve parallel alignment, how thick were the shim thicknesses you used and where did you place your shims? I’m having a hard time getting accurate adjustments using my shims. For example, my furthest in(negative) reading is at the 3 o’clock and 9 o’clock position at about -.003...my most positive reading is at the 6 o’clock position at about +.0020...when I shim the sides to correct for the negative issue, it pushes the bottom out even more positive. Am I doing something wrong? If not, what should I then do in order to bring my numbers closer together?(that’s the main idea right?) thanks for the help