1969 Twin Turbo Camaro project for sale

[desids]

SOLD!

I recently picked up another car, a '32 Roadster, and along with other life changes I need to let go of my Camaro project. The project was to build a high end SEMA show car, but still maintain street drivability. Many of you already know what goes into a professionally built car at this level - $400K and much higher. Cutting to the chase, I have 100% of the receipts totaling $210K, and looking to sell for $xxxK (updated with new price March 21, 2018). No corners were cut, everything done was top of the line. It started with an almost rust free body, with the only rust repair on the bottom rear quarters - that's all.

There are TONS of details on a web page I put together here:

www.TwinTurbo69.com

A couple of quick main features and a few pictures below, but if you are interested, please see the details on the web page above.

• 427 LS twin turbo built for about 1100HP - all internals and parts documented on the website above.
• Bowler 4l80e trans with Twist Machine paddle shifters
• DSE Hydroformed front subframe
• DSE QuadraLink rear suspension
• DSE subframe connectors
• 12 bolt axle with Wavetrac
• Baer brakes
• General body work started, panel alignment and finishing work to be done - everything in the pictures is all metal
• Aston Martin flush door handles installed and working
• 1969 Firebird rear bumper tucked in
• DSE mini tubs
• Marquez Design complete interior with modified dash
• Vintage air
• Infinity Box electrical system

Looking to sell everything for $xxxK, or would entertain selling the engine and/or transmission separately. I would be glad to answer any questions, or put you directly in touch with the project lead in charge of the build from the beginning at Campbell Auto Restoration and High Performance. The car is located in Campbell, CA.

Desi

[FasstChevys]

Please PM me your long block & auto trans prices. Thank you for your time.

[desids]

Please PM me your long block & auto trans prices. Thank you for your time.

Thanks for your interest - PMed.

[orsini motorsports]

how much for the engine?

[desids]

Thanks for asking, I was thinking about posting the engine/trans prices here since I have received a few emails on them already. Here is a list of the components, all of which I have receipts for:

ENGINE COMPONENTS:
ERL - 427 short block - $7,530.89
Comp Cams - Cam, rockers, springs, lifters - $2,675.35
AFR - Heads, studs, gaskets (separate charge second gasket) - $3,529.96
John Koster - Carbon fiber valve covers - $514.99
Lingenfelter Performance - Engine - timing chain damper - $32.45
Thunder Racing - Engine - Manley LS3 timing set - $172.87
Texas Speed and Performance - Engine - Oil pump and bolts - $227.33
Vintage Air / Campbell Auto - Front Runner, Gen-IV, condensor, etc - $4,029.59
OZMO Engineering - Carbon fiber cross ram intake - $4,546.50
T1 Racing Development - Injector Dynamics ID2000 injectors - $1,954.48
Kurturban Performance - Water line adapters and oil adapter - $253.36
OE Parts HQ - Front and rear engine covers - $201.31
Comp Cams - 16 push rods - $168.98
Summit - Oil pickup tube - $62.94
Summit - Holley LS oil pan - $437.90
ATP Turbo - Turbos, housings, wastegates - $5,420.16
Pro Fabrication - Stainless Steel header tubing and bends - $783.20
AEM Performance - AEM Infinity ECU, sensors, coils - $4,923.11
TOTAL - $37,465.37 (not including labor)

TRANSMISSION COMPONENTS:
Twist Machine - Compushift, Shrifter, Torque converter - $2,472.92
Bowler Transmissions - 4L80e - $8,868.50
TOTAL - $11,341.42

I'm looking for $xxx on the complete engine, and $xxx for the transmission and components. Together, I would go $xxx - that's almost $49K worth of all brand new parts. Just to reiterate, please go to the web page for tons of detail on every component and spec inside the engine: www.TwinTurbo69.com

[Stan]

Is car still available call me at 813 226 7402

[desids]

Yes it is, when would you like me to give you a call? 813 area code looks like Florida, so it's pretty late there now.

[desids]

Willing to consider a trade or partial trade, but it would have to be a pretty high end build.

[Josh@Ridetech]

Good lord...There are so many cool parts on this car. Good luck selling!

[desids]

Thanks, we only went for the best of the best. $210K worth, with all receipts.

[desids]

Quick update, this project car is still for sale. Here are two renderings from Kris Horton of the car as designed.

[southernfriedcj]

That looks amazing. Finish that bad boy!

[desids]

Wish I had the time and funds.

[desids]

NEW price! Well, I need to move this project to a new owner as we just moved and need to deal with landscaping, pool, furniture, etc. I have 100% of the receipts for $210,000 in parts and work. It was listed at $xxx and I have now lowered it to $xxx. This is an OUTSTANDING deal for everything included. It's still at a point where you can make it your own, pick your own body mods, interior mods and materials, paint color, wheels, etc. Or follow the original design concept as pictured above and on the website.

For all of the extreme detail and tons of pictures, please see the website for the car here:

http://www.TwinTurbo69.com

The car is located in Simi Valley, CA and I will deliver it within 100 miles to the new owner at no cost. Any questions PM me and I will get back to you. Thanks!

[Stan]

Is car still available 813 226 7402

[desids]

Yes, the car is still available. I would call, but I see your area code is Florida so it's 10:30pm there. you can PM me here and I'll give you a call, or we can talk tomorrow.

Desi

[desids]

I'm giving this one last chance - looking for a reasonable offer - and if it does not sell in the next few weeks, I will part it out. It would be a shame as the whole thing was a $210,000 investment, and can be had for xxx right now. If I part it out, it will be a hassle for me, but in reality I will probably get more for all the parts separately.

Make sure to see the extremely detailed web page listing all parts, and tons of pictures. The car is located in southern CA, currently in Simi Valley, but will be moving to my home in Moorpark, CA shortly.

http://www.TwinTurbo69.com

[southernfriedcj]

I'd get a nice display made up with all the details and run the car through Mecum.

[desids]

I'd get a nice display made up with all the details and run the car through Mecum.

They take non-running cars? There are way too many loose parts to take it anywhere for something like that, I would think. Not sure how all of the pieces could be protected from theft.

[pittpens24]

Just hang on to it til after Saturday's powerball. If I win I'll take it