68 BUICK GS Build

[Sebambam]

Sorry forgot to post the stance pics.

[badolds]

Looks real nice, good job!!

[Sebambam]

Thanks alot

[deejai35]

Looks mean. You nailed the stance.

[Sebambam]

Looks mean. You nailed the stance.

It looks great but i doubt that it is drivable.. The fron tires will rub, iput some spring spacers in which didnt help at all.
So i decided to get new springs, UMI 2 " LOWERING i took the spacers out in the back so it sits stock in the rear now.

[deejai35]

It looks great but i doubt that it is drivable.. The fron tires will rub, iput some spring spacers in which didnt help at all.
So i decided to get new springs, UMI 2 " LOWERING i took the spacers out in the back so it sits stock in the rear now.

I bought 2 inch BMR front springs for my 72 Cutlass but didn't take into account the half inch drop from taller ball joints. I switched to 1 inch drop springs giving me a 1 1/2 inch drop. No rubbing, but I wouldn't have gone further than that.

[Sebambam]

Time for a short update.
Since im building a sbb twin turbo i istalled the IC, gained access to the engine bay through the lower core support and i installed a fuel cell from Robbmc.
I took the time fab,paint, and wire everything accordingly.
Further i bought a 750 blowthrough carb.

[rohrt]

I'm digging the build. I sure like the rims. Looking at the last two pics I think you should do some bumper surgery and open up the bottom side of the bumper to expose the the intercooler

[Sebambam]

I was planing on doing the vinyl top and headliner before i sfinish the motor work but this upholstery guysout here are either stupid expensive or super unreluable. So i decided to modify my 04 GTO seats myself and im was able to gather some great infos for a diy installion on here...

Further i decided to continue the engine/twin turbo build and get it running 1st.
So IC piping mock up is coming along, the timing will be locked out, and i go blowthrough carb since im not convinced of the efi boost systems yet, to me they not really self learning and not "there" yet so i go carb.

[Sebambam]

Got the vinyl top on, seat brackets built and the
Manifolds,Turbos,wastegqtes and downpipes sitting in place.

[1100kaw]

great build. Been a while since a post? hows it coming????
I have a 68 im starting on now. Had a bunch of these step child cars. I'm thinking about bulging the entire rear quarter panel out, kinda like a wide body to get meat under it
lets see some updates