Results 1 to 7 of 7
Thread: Flush static engine block.
-
10-25-2016 #1Registered User
- Join Date
- Mar 2005
- Location
- Salinas, CA. 4.5 MI from the Corkscrew @ Laguna Seca
- Posts
- 62
Flush static engine block.
I have pulled the motor from my 68 Camaro to minor engine work and do other things to the engine compartment. When I put it back in the car I am going to install a new aluminum radiator. Griffin says to use a mix of distilled water and antifreeze. My question is, what is the best way to drain/flush the water that is in the block while it is out of the car? It looks kinda dirty. Also, what antifreeze are you using with your aluminum radiator? Any suggestions would grateful. Thanks for your help, TZ
-
10-27-2016 #2Registered User
- Join Date
- Jun 2005
- Location
- Arizona
- Posts
- 11
TZmtrsprt,
We recommend choosing the brand coolant you want to use and follow the coolant manufactures instructions. For flushing and filling the system.www.RonDavisRadiators.com The Official Radiator of Pro-TouringTM
-
10-30-2016 #3