1969 Camaro Convertible Touring Project - Ridetech, Moser and a lot more.

[Boostable]

Moving and want to build a new shop on the new property, so selling this project to help pay the way. I am very reluctant to sell it and would prefer the buyer be far far away so i never have to see it on the road. It really only needs to be assembled and painted. I have attached a rendering of my goal and some pics along the way. The car is currently in primer and I will post some current pics by this weekend, but you get the idea.

The car is steps away from being ready for final assembly and will be a short project for someone.
Body has been completely rebuilt will all new sheet metal, zero patches or rust on this car, including mini tub and frame connectors. Panels have all been fitted, body has been seam sealed and primed and it is ready for paint, bottom is already painted. Body has cut out and boxed air ducts in front of rear wheels as well as a custom fabricated rear three piece spoiler and front to match. Doors have flush mount Kindig-It door handles installed.
Fully welded frame with full ridetech air suspension front and rear. Narrowed Moser 12 bolt in the rear with 3.73 gears. All the goodies form Ridetech including tank, compressor, auto leveling, remote, etc.
Included with the sale are many parts original and new that are ready to go back on the car. All parts are new unless otherwise noted. This is just what I can think of off the top of my head.
Ridetech Stage 2 air ride System with ride sensors.
Front Components:
1 11163011 TQ Series Front Shockwaves
1 11162899 Front Lower StrongArms
1 11163699 Front Upper StrongArms
1 11169100 Front MuscleBar Sway Bar w/ PosiLinks
1 11169500 Complete Tru Turn
Rear Components:
1 11167199 Rear AirBar – Bolt-on 4 Link (Welded)
1 24350701 Rear Master TQ Series Shockwaves
1 11169102 Rear MuscleBar Sway Bar w/ PosiLinks
Compressor System:
1 30314100 5 gallon AirPod w/RidePro Digital Control System
1 30400034 LevelPro Upgrade - 4 External Height Sensors
1 31008500 Two key fob remotes with antenna
Moser 12 bolt rear, narrowed, 4 link, 3.73
Wilwood front vented discs and calipers
GMTILT Tilt steering column
Kindig-It Flush Mount Door Handles
Painless Full wiring harness
Intermittent Wipers
Billet Air Frame Hood Hinges
Billet Trunk Hinges
Billet AC/Heat Bulkhead
Aluminum Radiator
OEM RS Grill
Endura Front Bumper
Electric Life Power Windows
Electric Life Door Locks
Electric Life Truck Lock
Hydratech Braking System
Wilwood Dual Mater Cylinder
Hood Stops
Hood Latch
Trunk Stops
AGR 12:1 Steering Box- Installed
Bear Claw Door Strikes - Installed
Bear Claw Door Latches- Installed
Set of BMW 850i power convertible seats – Used
GM LQ9 complete w/harness and ecu – Used
Caddy front drove setup - Used

Original Parts
Convertible Frame
Chrome body/window trim
Gauge Bezel – No cracks
Factory dash gauges
Factory Seats Front and Rear
Other misc parts, ash tray, glove box door and insert, etc. If you can think of it, I probably have it.

Im sure I am forgetting a ton of stuff, but will add as I remember. If you have a question just ask. Those of you who have been down this road know I have a lot of money in this car but my loss, your gain. Asking $30K, but will entertain a respectable offer. I have significantly more time and money in it. Clear Florida title.

[Boostable]

Pending...

[Boostable]

SOLD and gone..