Results 1 to 8 of 8
-
04-07-2016 #1
Registered User
- Join Date
- Jan 2015
- Posts
- 82
FS:1998 Jeep GrCherokee 5.9 limited with an extraordinary amount of mods.
1998 built Cherokee, about 80k on body. This truck moves!!!!
* Hughes Performance built 6.7L/408 Stroker bottom end, 8.5:1 Compression forged pistons, H-Beam rods, 4" crank
* Ported & Polished R/T heads, 2.02 intake/1.62 Exhaust, port matched
* Blower cam
* 1.7 Roller Rockers
* Hughes 55mm Throttle Body (Serial Number 001 )
* M1 Single Plan Intake manifold
* Vortech SQ trim supercharger
* Mopar Headers
* 3" exhaust with dump after headers (opened during video)
* Return-line fuel system, Aeromotive regulator, KRC fuel rails, uprated injectors, A1000 pump w/ standalone controller, Walbro 225 in-tank pump.
* MSD Ignition box w/ timing retard control
* 2500 stall torque converter
* TCU built 231 transfer case
* 3-core aluminum radiator
* 50k# transmission cooler
* Currie built Ford 9" rear with 3:70 gears & Detroit TrueTrac (worm-gear LSD)
* Wilwood Dynalite 4 piston rear brakes
* Wilwood GN-3 6 piston front brakes
* Addco Swaybars front & rear
* Hotchkis LCAs
* H&R Sprigs
Have new front rotors that will be installed, gas tank pump seal and IAT sensor.
Allso have dyno sheet, something like 430/470 ft lbs on "heartbreaker dyno". Maps to about 492/535 on the more common dynojet.
Have YouTube video but can't paste it for some reason, search YouTube for 6.7 L zj burnout it should be the first one.
Asking $10,500. No time to use it with kids and house my loss your gain. Folder of receipts as well.
check out more pictures at. http://nh.craigslist.org/cto/5546412661.html
Email [email protected]
Text: 978-423-4750
-
04-07-2016 #2
Registered User
- Join Date
- Jan 2015
- Posts
- 82
Forgot to mention it has 2wd, 4hi, & 4low NP231 transfer case built by Transfercases Unlimited
-
04-07-2016 #3
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,975
Post location please. Pics are also helpful.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
04-07-2016 #4
Registered User
- Join Date
- Apr 2006
- Posts
- 62
In MA? What shape is the body in?
Garage www.fquick.com/mac
-
04-08-2016 #5
Registered User
- Join Date
- Mar 2013
- Location
- Las Vegas
- Posts
- 175
Pictures?
69 Camaro - LS7 441ci ;wet sump, Custom cam, Port matched MSD intake, ported 90mm TB, Texas Speed PRC 285cc LS7 heads withBTR rockers. Tick built T56. Scott Mock subframe, TCI torque arm rear setup, C6 Z06 brakes, built ford 9" 3.73 gears, Trueforged 3pc Wheels. Lots more
-
04-11-2016 #6
Registered User
- Join Date
- Jan 2015
- Posts
- 82
Body is in good shape. Truck is coming out of storage next week and I will take better pictures. Yes I am in MA. This is the engine bay.
-
04-19-2016 #7
Registered User
- Join Date
- Jan 2015
- Posts
- 82
everything is in my CL for sale add. http://nh.craigslist.org/cto/5546412661.html
-
05-18-2016 #8
Registered User
- Join Date
- Jan 2015
- Posts
- 82
Sold
Reply With Quote
