New Hooker 2nd-gen F-body/DSE headers and exhaust system

[badazz81z28]

You are correct about the crossmember being a floor-mount design. The DSE specific parts, including the crossmember, are another design engineer's projects here, so I have limited knowledge of the specifics of those parts. As he doesn't support the forums as I do, your best bet for obtaining further information is to monitor the Hooker 2nd-gen F-body LS swap pages of the Holley website. I believe the crossmember will be up and listed within the next couple of weeks.

Do you have a POC I can call? I really want to be all over it when its first released.

[Toddoky]

Do you have a POC I can call? I really want to be all over it when its first released.

If you mean an individuals name, I don't as the product is not released yet. Once it is release then you can get pertinent information about it through the tech service line. If you check this link every morning and/or evening, you'll be as aware of its status as anyone else:

https://www.holley.com/products/ls_p...ap_components/

[badazz81z28]

You say in a few weeks it might be avail? Would someone know for sure?

[Toddoky]

You say in a few weeks it might be avail? Would someone know for sure?

I quizzed the responsible designer for you and he estimates 30 days for them to be on the shelf.

[badazz81z28]

I quizzed the responsible designer for you and he estimates 30 days for them to be on the shelf.

Please keep me in mind if sooner....you want a test dummy!

[Aussie]

I quizzed the responsible designer for you and he estimates 30 days for them to be on the shelf.

Any updates on crossmember?

[Aussie]

Any updates on crossmember?

It seems to have gone very quiet on this?

[Toddoky]

I've not heard anything new from the responsible designer, so my recommendation would be to monitor the Holley website for availability. I can provide live updates on projects I am personally responsible for, others such as this require me to go snooping around.

[Aussie]

I've not heard anything new from the responsible designer, so my recommendation would be to monitor the Holley website for availability. I can provide live updates on projects I am personally responsible for, others such as this require me to go snooping around.

Hi Todd, thanks for update, I fully understand where you are at. I am checking web site quite regularly

I am at a crossroads, I have ordered headers as recommended, that I am sure will work with the cross member, based on how successful the previous released items have been.

I now have option/decision on what to do. This is very much dependent on when cross member is available, as we will soon run out of things we can finalise with out engine & trans mocked up in place

[Toddoky]

I understand your situation and I'll see if I can find out anything more concrete for you today.

[Toddoky]

Hi Todd, thanks for update, I fully understand where you are at. I am checking web site quite regularly

I am at a crossroads, I have ordered headers as recommended, that I am sure will work with the cross member, based on how successful the previous released items have been.

I now have option/decision on what to do. This is very much dependent on when cross member is available, as we will soon run out of things we can finalise with out engine & trans mocked up in place

The crossmember is up on the Holley website; you can search for it using part number 71222006HKR. The components are due to arrive at our shipping facility on Friday and from experience it usually takes a minimum of a week for them to get boxed up and placed on the shelf.

[dhutton]

The crossmember is up on the Holley website; you can search for it using part number 71222006HKR. The components are due to arrive at our shipping facility on Friday and from experience it usually takes a minimum of a week for them to get boxed up and placed on the shelf.

If there was an award for most helpful vendor you would win it hands down. I constantly see you stepping up and helping guys on multiple forums.

Don

[Toddoky]

If there was an award for most helpful vendor you would win it hands down. I constantly see you stepping up and helping guys on multiple forums.

Don

Thanks Don, it really makes my day knowing my efforts to help out are appreciated. I know you users sometimes need info that's hard to come by through normal channels, so I pitch in where I can.

[Aussie]

The crossmember is up on the Holley website; you can search for it using part number 71222006HKR. The components are due to arrive at our shipping facility on Friday and from experience it usually takes a minimum of a week for them to get boxed up and placed on the shelf.

Much appreciated. thanks Roger

[Aussie]

The crossmember is up on the Holley website; you can search for it using part number 71222006HKR. The components are due to arrive at our shipping facility on Friday and from experience it usually takes a minimum of a week for them to get boxed up and placed on the shelf.

Hi, I ordered via Summit (Holley only ship USA), was meant to be available May 4, new status says May 24, do you know if they have started dispatching this crossmember, this is time critical piece of the puzzle right now

Thanks

[Aussie]

Current status on crossmember now May 30, have any been shipped?

After being on back order, Headers finally made it to Australian customs, only to be sent back, due to incorrect paperwork. Waiting on info on new shipment

So the wait for parts continues

[Aussie]

More frustration, well after an original release date of May 4, this had now gone out to June 6. So Monday afternoon I called Hooker and was told they had been waiting on a component, but had them all now and June 6 would be the date. Checked status on web site today, only to see it is now June 10, 4 day drift in 24 hours.

[Doug1]

What's the latest on this? Need to decide between this and Pypes ASAP

[badazz81z28]

Anyone use this crossmember yet?

[Aussie]

Yes, I have. I'll try and get some pics