Best oil pan for lex 454 in 67 camaro

[KB Camaro]

I'm doing a lsx 454 swap in my 67 camaro and wanted to ask members what oil pan they prefer. here are the only 3 i could find.

Holley has the LS retrofit oil pan--6 quart capacity with filter but no windage tray
http://www.jegs.com/i/Holley/510/302-1/10002/-1
Moroso has LS oil pan--6.5 quart capacity with filter and windage tray
http://www.jegs.com/i/Moroso/710/21150/10002/-1
Milodon has a LS oil pan--7 quart capacity with filter and windbag tray
http://www.jegs.com/i/Milodon/697/30915K1/10002/-1

[SD67]

I have the Holley pan but I think others are using the autokraft Ls pan. Got to get one that clears that crank

[Corey R.]

The Holley pan will require you to notch the frame.



I am using the ATS road race pan. I compared the measurements to both Holley pans, and it sits in between the 2.

I do not have it installed in my Camaro yet. I am planning on using the Holley motor mounts and Cross member. I won't know if the pan will clear the frame until I go to install it. If it does not clear, I may have to go with the rest of the speed tech components. Speedtech states their components will require the floor pan to be cut to fit a T56. They state proper angles cannot be had without cutting. The Holley Kit states proper drivetrain angles can be had without cutting.