World War Z - LSA powered 1970.5 RS ZL1 with Full RideTech Stage 2

[Zapper]

We are finally at the last stages of bringing World War Z to reality.....

• 2013 LSA with 6L90e Paddleshift Trans
• Current Performance LSA Harness
• BTR Stage III Blower Cam
• Lingenfelter Blower Pulley
• Nitrous Outlet 200hp Cheater System
• Custom Dual Pump LS Fuel System
• Full BRP Muscle Rods LS Swap kit with long tube headers.
• Holley LS swap oil pan and custom trans pan
• custom dual K&N Ram Air intake / parking light delete
• ANVIL Auto Full Carbon Hood / Inner Fenders / Fender Support Rods
• Ring Brothers body hardware and door strikers
• Full Carbon Fiber front and back bumpers
• Billet Hood Struts

• ridetech Stage 2 full air suspension system
• SPC fully adjustable Tubular uppper control arms
• 14" Wilwood Brakes
• RSV Forged Custom 19x11 and 19x13.5 Wheels
• Detroit Speed wheel tubs

• Full Alcantera and Leather custom interior
• Full RACEPAK iQ3 dash kit
• Sparco seats, Alcantera Steering Wheel and belts
• Push Button trans controller and Paddleshifters from SHRIFTER

All custom body, fender flares, exhuast and engine mods by Cyrious GarageWorks

Looking to finish the fender flares and do some full dyno pulls in the next 2 weeks

[rchaskin]

Awesome....Forget the fender flares. Id leave it just like that.

[CampbellshotrodsAZ]

Looks wicked! And let's see the fender flares! An alternative benefit is they contain crap from flinging all around and landing on top of the car.

[RLJ676]

Bad ass.

I'm building a 72 w LSA supercharged motor myself. Couple questions if you don't mind...

Would a regular anvil hood fit, or only power bulge? I have a power bulge on order (forever....) but might want flat if it fits. What mounts did you use?

Are you running AC, what did you do for compressor?

Love the car!

[andrewb70]

Looks cool but is it even drivable?

Andrew

[raustinss]

Who cares about driveable ....stellar car...where abouts in Ontario are you ? . I would'nt mind checking it out some time . I could also hook you up with a awesome LS builder/tuner if needed.

[Motown 454]

Nice car! I love the name. It looks Wicked!!!

[andrewb70]

Who cares about driveable ....stellar car...where abouts in Ontario are you ? . I would'nt mind checking it out some time . I could also hook you up with a awesome LS builder/tuner if needed.

Well, if you can't drive it, then it's not a car, it's art. I'm not opposed to art, just don't pretend it's a car...lol

Andrew

[parsonsj]

It seems like there's not much suspension travel, especially in compression.

I do like the split bumper 2nd gens.

[Mr.VENGEANCE]

well it says in his mod list that hes on ridetech Air.. im sure its down for the pics..

I like how its lookin for sure and a cool name!

[raustinss]

well it says in his mod list that hes on ridetech Air.. im sure its down for the pics..

I like how its lookin for sure and a cool name!

Bingo!

[Zapper]

Bad ass.

I'm building a 72 w LSA supercharged motor myself. Couple questions if you don't mind...

Would a regular anvil hood fit, or only power bulge? I have a power bulge on order (forever....) but might want flat if it fits. What mounts did you use?

Are you running AC, what did you do for compressor?

Love the car!

I believe that regular Anvil good will clear. The LSA should clear a stock good as well, depending on how you mount it.

I'm not running A/C

[Zapper]

Who cares about driveable ....stellar car...where abouts in Ontario are you ? . I would'nt mind checking it out some time . I could also hook you up with a awesome LS builder/tuner if needed.

Well, if you can't drive it, then it's not a car, it's art. I'm not opposed to art, just don't pretend it's a car...lol

Andrew

Full ridetech Stage 2 system is full adjustable

[Zapper]

Who cares about driveable ....stellar car...where abouts in Ontario are you ? . I would'nt mind checking it out some time . I could also hook you up with a awesome LS builder/tuner if needed.

I'm in Mississauga, just outside of Toronto.

[raustinss]

I'm in Mississauga, just outside of Toronto.

nice ..if your ever down this way id love to see it ...beers on me

[Hellrace]

Nice build and with the correct parts :-)
I'm doing the same with my 70 camaro, Martz chassi, tigercage and of course the lsa 6L90e combination, I have some question regarding this because I have only fitted the engine and tranny. Is it possible for to put some more pictures so I can see how you have solved the positioning of things, thinking of the tranny how the engine sits etc.
And how did you get the padel shifter to work ?
This is the build that get give me some directions with my own build

Here is a picture from mine

[andrewb70]

Full ridetech Stage 2 system is full adjustable

Can we see a picture of it at driving ride height?

Andrew

[Jerico]

BADASS! Was the chin spoiler bought or built?

[RLJ676]

I believe that regular Anvil good will clear. The LSA should clear a stock good as well, depending on how you mount it.

I'm not running A/C

Cool, thanks. Any pics w/ hood down?

If you skipped AC due to packaging it in there Qwik has a new low mount for the mini sanden that is supposed to fit. I should know for sure in about a week.

[Zapper]

Cool, thanks. Any pics w/ hood down?

If you skipped AC due to packaging it in there Qwik has a new low mount for the mini sanden that is supposed to fit. I should know for sure in about a week.

More pics