Anyone running entropy radiator

[cali-life]

Is anyone running entropy radiators looking for some install pic. Looking for p[ic of where they mounted the fan control box?

[nats68]

I mounted the fan control box behind the passengers side headlight on the core support. Not real convenient to get to but hopefully I won't need to get to it. I ran the wires around the core support through the fender next to where the battery would go. I will check for pics but don't think I have any.

[mikeextrafast]

I mounted mine below the radiator on the support

[cali-life]

i going with this.

[Justin@EntropyRad]

Clean mounting!

[icemanrd19]

can you post pic with the radiator installed with straight fender braces?

[Justin@EntropyRad]

With our radiator installed, you will either need to mod or move the straight braces as the cap will come into contact with the drivers side brace. OE BBC or Fesler curved braces work great with our setup

[nats68]

can you post pic with the radiator installed with straight fender braces?

I will post a pic. Mine is real close but doesn't hit. You can still get the cap off, it's not real easy but you can get it off.

[nats68]

Here's a couple of pics. real close but not touching.

[MAGONSTERZ68]

are you running rubber isolators between radiator and core support or bolting directly onto it?