Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 1 of 1
    1. #1
      Join Date
      Jan 2006
      Location
      Southern California / Maryland
      Posts
      488
      Country Flag: United States

      6.1L Hemi Stand Alone Wiring Information

      Because so many people ask.... I'm giving a cliffnotes version of what needs to be done to make your harness applicable to an older muscle car... . this will work for a 5.7L or a 6.1L Hemi - I'm 99% sure a 6.4L as well.... no first hand experience though....



      Cliffnotes.... You'll only be using the Black, Orange, and White connectors for this one.... if you're using the mopar trans then you'll use the green connector and be asking for a lot of ass pain going with it.

      BLACK CONNECTOR:
      Pin 29: Wire to terminal 86 / 30 on Auto Shut Down Relay (ASD)
      Pin 30: Wire to pin 85 on a Starter relay

      ORANGE CONNECTOR:
      Pin 8: NOT USED
      Pin 22: NOT USED

      WHITE CONNECTOR:
      Pin 3: ASD Relay terminal 85
      Pin 8: NOT USED
      Pin 11: A/C Relay terminal 85
      Pin 14: NOT USED
      Pin 19: ASD Relay terminal 87
      Pin 20: NOT USED
      Pin 23: NOT USED
      Pin 28: ASD Relay terminal 87
      Pin 29: NOT USED
      Pin 35: NOT USED
      Pin 37: fuel pump relay terminal 86
      Pin 38: Starter Relay terminal 86


      This should be getting 99% of you guys on the road.... If you are using the NAG1 or truck trans - just use the green connector and plus into the trans.... any other specific questions PM me and I'll do my best to answer while I'm in the Middle East.
      1966 Chevrolet Chevelle 300 Deluxe 350 / 350 auto

      1968 Dodge Charger SRT8 6.1L Hemi / 6-speed

      1964 Dodge Polara 8-71 Blown 440 / 4-speed

      1998 Toyota 4Runner SR5 3.4L / 5-speed

      2013 Dodge Challenger R/T 5.7L Hemi / 6-speed




    Advertise on Pro-Touring.com