Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 2 of 2 FirstFirst 1 2
    Results 21 to 22 of 22
    1. #21
      Join Date
      Aug 2007
      Location
      Roanoke (FortWorth) Texas
      Posts
      786
      Another question about tire tread depth.

      Using an actual depth checker on my Falkens, Im right at 2/32 on the inner groove but the outer is almost 4/32. Do they check the outer wear bars or inner as well. How thorough are they?

      If I can run these and buy new tires afterwards it would be great. Im sure tire availability is going to improve as soon as the event is over. I'd rather run a sponsor tire if can.
      Chris

      Total Cost Involved - Ridetech - Fatman - Total Control Products - Gateway Performance - MaverickMan Carbon

    2. #22
      Join Date
      Sep 2014
      Location
      Sun City West, AZ
      Posts
      672
      Country Flag: United States
      Quote Originally Posted by GrabberGT View Post
      Another question about tire tread depth.

      Using an actual depth checker on my Falkens, Im right at 2/32 on the inner groove but the outer is almost 4/32. Do they check the outer wear bars or inner as well. How thorough are they?

      If I can run these and buy new tires afterwards it would be great. Im sure tire availability is going to improve as soon as the event is over. I'd rather run a sponsor tire if can.
      The minimum tread depth is 2/32". I would say you are legal to run those tires.

      --
      Kenny Mitchell
      [email protected]


    Page 2 of 2 FirstFirst 1 2




    Advertise on Pro-Touring.com