Results 1 to 13 of 13
Thread: CMB Custom Mini Bike Chopper
-
08-30-2014 #1
Registered User
- Join Date
- Aug 2004
- Posts
- 433
CMB Custom Mini Bike Chopper
Item Location (City/State):Vacaville, CA
Price:$1500
Description:
He guys I'm thinking about parting with my mini chopper. It was made by a company a while back called CMB (Custom Mini Bikes).
Tank & rear fender are metal, front is plastic (I think), 6 hp Tecumseh with pull and electric start. The paint is equal to what you would have on a full size chopper. As you can see lots of chrome and powder coating, rear disk brake, headlight works.
New these things were expensive 4-6k range of course before all the imports hit the market.
No Shipping is this thing is near 7ft long.
Will have to be local pickup
Not for street use in CA
-
09-13-2014 #2
Registered User
- Join Date
- Aug 2004
- Posts
- 433
Bump
11-05-2014 #3
Registered User
- Join Date
- Aug 2004
- Posts
- 433
Bump
11-10-2014 #4
Registered User
- Join Date
- Nov 2012
- Location
- ST. LOUIS MO
- Posts
- 69
Wish you were closer
02-11-2015 #5
Registered User
- Join Date
- Aug 2004
- Posts
- 433
Bump
02-20-2015 #6
Registered User
- Join Date
- Aug 2004
- Posts
- 433
Bump
03-26-2015 #7
Registered User
- Join Date
- Aug 2004
- Posts
- 433
bump
02-22-2016 #8
Registered User
- Join Date
- Aug 2004
- Posts
- 433
I still have this. I will be at optima ThunderHill this weekend weather permitting and could bring it.
03-18-2016 #9
Registered User
- Join Date
- Aug 2004
- Posts
- 433
Bump
01-13-2017 #10
Registered User
- Join Date
- Jan 2017
- Posts
- 1
Do you still have this choppers
Originally Posted by Jeff70
11-30-2018 #11
Registered User
- Join Date
- Nov 2018
- Posts
- 2
Hi new at all this, any help is appreciated. I have a Tecumseh that came off of a cmb chopper. I'm in the rebuild process and unable to find the output shaft seal. I only find the seal for the bushing side cover as I have the bearing side cover, anyone know what these engines we're orginal built for?
11-30-2018 #12
Registered User
- Join Date
- Aug 2004
- Posts
- 433
I have no idea. But when I needed to rebuild the carb I went to my local Stihl & general lawnmower repair shop and they had everything I needed.
12-02-2018 #13
Registered User
- Join Date
- Nov 2018
- Posts
- 2
That's what I did, but when cmb modified the engine they removed the engine id tag and shops around me couldn't help me with out these numbers. If I knew what the engine orginaly used for I could cross reference to get the info I need¿
Reply With Quote
