Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 3 of 3
    1. #1
      Join Date
      Nov 2013
      Location
      Centreville,md
      Posts
      2
      Country Flag: United States

      body panel replacement recomendation

      Hello all new to the forum,

      I have a 67 Chevelle that I just started to put some work into. IT has had alot of metal replacement done and done well as best I can see. I have however uncovered some issues and decided it is best to deal with them now. With that said I need/want to replace quarters and rear wheelhouses as well as under seat portion of the floor. Now the floor I am going to tackle myself but being somewhat new to welding I am not sure I want to conquer the quarters on this car and end up with a bad result/bad gaps,etc. Can anyone recommend a GOOD installer on the east coast preferably Maryland?
      I need someone that is not going to jerk me around for a year my engine is at dyno and trans is in route I want to flip the car in and out of their shop in 1-2 months max.
      If they have the ability to blast that would be an added bonus so I dont have to at a different location prior.
      Any recommendations would be appreciated

    2. #2
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,488
      Country Flag: United States
      How about musclecarmetal.com? Not sure if he does Chevelles but probably worth a call.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside

    3. #3
      Join Date
      Nov 2013
      Location
      Centreville,md
      Posts
      2
      Country Flag: United States
      I will check then out thanks!





    Advertise on Pro-Touring.com