Results 1 to 4 of 4
Thread: Gauge Cluster help!
-
07-23-2014 #1
Registered User
- Join Date
- Jan 2010
- Location
- NY
- Posts
- 41
Gauge Cluster help!
How do you mount this gauge cluster without drilling holes in the plastic cluster? I installed Autometer gauges and they mount nicely but I don't know how I can mount it to the dash without putting screws through the cluster. What can I fabricate to hold it in place?
-
07-23-2014 #2
Registered User
- Join Date
- Aug 2004
- Location
- Jacksonville, FL
- Posts
- 1,651
I assume it should fit like the factory bezel, it should slip onto the top mounting and then secure n the bottom using the 2 factory screws like the factory one did.
Chris
1968 Chevy Camaro SS
LS3/T56 DSE suspension
-
07-23-2014 #3
Registered User
- Join Date
- Jan 2010
- Location
- NY
- Posts
- 41
Gauge Cluster help!
There is nothing for it to slip into on the top. I can put fender clips on the bottom but what can I use for the top? Any suggestions?
-
07-23-2014 #4
Registered User
- Join Date
- Aug 2004
- Location
- Jacksonville, FL
- Posts
- 1,651
See my post in this thread- https://www.pro-touring.com/threads/...all?highlight= There is a piece that attaches to the dash and thats what holds the bezel in place. Hope this helps!
Chris
1968 Chevy Camaro SS
LS3/T56 DSE suspension
-
Tags for this Thread
Reply With Quote
