Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 3 of 3
    1. #1
      Join Date
      Nov 2013
      Posts
      6
      Country Flag: United States

      I need help!! - Engine Mounts, 2nd Gen

      I stuffed a big block in a small block 72 Camaro. I bought it with Moroso Engine mount towers already in place. I have Suspension Engineering Motor mounts, and after I dropped it in the motor sits about 7/16 high on the passenger side. Does the 72 have mounts that are different heights on both sides? I just want to make sure before I start drilling more holes, and throwing off alignment issues.
      Last edited by Damn True; 05-02-2014 at 11:33 PM.

    2. #2
      Join Date
      Jul 2005
      Location
      Mountain View, CA
      Posts
      9,583
      Country Flag: United States
      Bumping this in hopes you get an answer
      True T.

      Whats new with Project 1/2-Trak?


      Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.

      My blog

      When they kick out your front door, How you gonna come?
      With your hands on your head, Or on the trigger of your gun?

    3. #3
      Join Date
      Mar 2011
      Location
      Ca
      Posts
      336
      Country Flag: United States
      This is just my opinion here but since your towers aren't factory I'd guess someone didn't measure twice when installing those, I'd say go to your local auto store and get a set of stock replacement mounts out to measure them and see if factory mounts are offset or not, I kinda doubt they would be different from one side to the other.





    Advertise on Pro-Touring.com