Results 1 to 3 of 3
Thread: GM Showroom Stock Cam
-
03-16-2014 #1
Registered User
- Join Date
- Jul 2012
- Posts
- 138
GM Showroom Stock Cam
Anybody swap this cam into your car? My plan was to get a 6.0L out of a truck and swap in this cam. I don't know what else is done to this truck, but this thing has one heck of an idle and some serious horsepower.
-
03-17-2014 #2
Registered User
- Join Date
- Dec 2010
- Location
- Fredericksburg, VA.
- Posts
- 3,155
That is baddass but I have to wonder how drivable it is in stop and go traffic.
Steve Hayes
"Dust Off"
68 Camaro
Given sufficient initial acceleration, even pigs can fly!
-
03-17-2014 #3
Registered User
- Join Date
- Jul 2012
- Posts
- 138
"This cam has higher valve lift, .570" intake and exhaust, than production camshafts. The duration at .050" lift is 239 degrees for intake and 251 degrees for exhaust. The lobe centers are at 106.5 degrees. It has a broader torque range and higher horsepower range than the ASA racing camshaft.
Showroom Stock racing design; requires hollow stem intake valves P/N 12565311, hollow stem exhaust valves P/N 12565312, valve springs P/N 12586484, and aftermarket notched pistons OR machine stock pistons"
-
Reply With Quote
