1986 Buick Pro-touring T-Type

[xxxturbo6]

Well the time has come to sell our test car and move onto another project. This car has been to Many ASCS pro-touring events and has been seen by Many here on this board at those events that can vouch for the car and it's performance. This car drives as well as it looks!

If you have any questions or would like to see more pictures please shoot me a PM and I will give you my number...

$32,000

For video of the car in action please visit us on Youtube: http://www.youtube.com/channel/UCqRCQUhhK3Yz-kNqmdHQ7gw


For detailed suspension/Brake pic's see links below:

BAER Brake Install thread: http://www.turbobuick.com/forums/thr...nstall.343546/

DSE Suspension Install Thread: http://www.turbobuick.com/forums/thr...-build.329141/

ridetech Tru-Turn & Shock Install Thread: http://www.turbobuick.com/forums/thr...nstall.397417/


1986 Buick T-Type Specs’

Engine: Freshly Balanced & Blueprinted by Richard Clark & Myself (2012)

• I have the blueprint sheet that Richard Clark & I did showing all measurements of the engine!
• J&E Pistons .20 over with J&E file fit rings done by myself
• Carrillo “H” beam rods w/ ARP L19 rod bolts
• Seal Power bearings (2012)
• ARP Main studs – New (2012)
• ARP Head bolts – New (2012)
• Stock heads w/ stainless steel valves & new Viton seals – New valve job ( 2012 )
• Alky Control Progressive Methanol injection – New Pump in 2012
• H&R Poly motor mounts
• 55lb Injectors – (Matched & Flowed)
• TE-44 Turbo w/ Garrett exhaust Housing – Freshly rebuilt by "Bison" (2012)
• Blue printed Oil Pump by Richard Clark – New in (2012)
• Comp Cams 206-206 flat tappet cam – New in (2012)
• Eastern Performance Front mount Inter-cooler
• 3” Stainless Steel down pipe with RJC waste gate puck installed
• F-body aluminum radiator
• 160* T-stat
• Intrepid Dual fans
• Built 2004r trans, 500 boost valve, billet servo, alto clutches.
• Protorque 3000 stall (Spragless) Non lock up converter w/ all fins Tig welded
• GNS Cold air intake
• LT1 MAF
• Stock Ignition with custom fit MOROSO Ultra 40 wires
• Extender programmable chip
• Translator Plus programmable box
• GNS Carbon Fiber Core support braces
• Custom one off baffled oil pan by RJC Racing for Auto-X / Road racing
• Power logger data saving software installed onto OEM computer
• New Quick Ratio steering box (2012)

Exhaust system:

• Dual ATR 3” stainless steel exhaust with Pit bull mufflers

Interior:

• Pro-car Elite 1100 seats by Scat with custom Suede inserts
• Suede head liner
• Suede upper door panels
• Stock rear seats custom upholstered to match the fronts
• Suede rear deck lid
• Whole interior dyed black
• New black carpet
• Custom made GNX style dash with white faced Phantom Auto-meter gauges and LED lights as turn signal markers. Also has the ALKY turn on and low level lights built into the face of the dash cluster.
• Pioneer stereo with remote (New 2013 )
• Rockford Fossgate Component speakers & Tweeters in front. (New 2013)
• Pioneer 3-way speakers in rear deck lid. ( New 2013)
• Scan master

Suspension:

• Front- Ridetech's NEW “Tru-Turn Upper & lower A-arms (with Delrin bushings) with caser tuner slugs. (New 2013)
• Front- DSE frame braces
• Front- DSE Sway bar
• Front- Ridetech Single Adjustable Coil Overs (New 2013)
• DSE - Steering Shaft

• Rear-Ridetech Single adjustable Coil Overs (New 2013)
• Rear- DSE Upper adjustable control arms (with DSE’s swivel link ends)
• Rear- DSE Lower adjustable control arms (with DSE’s swivel link ends)
• Rear- DSE Sway bar (Chassis mounted & adjustable)

Wheels & Tires:

• Made by CCW (Classic Custom Wheel) 3pc racing wheels – weigh 20lbs ea.
• Centers were black brushed anodized along with the center caps
• All locking black Gorilla lug nuts
• Front: 18” x 9.5”- 4.75” back spacing
• Rear : 18” x 10” - 4.75” back spacing

TIRES

• Front: BFG KDW2 255/35-18 ( New Sept 2013 )
• Rear: BFG KDW2 295/35-18 ( New Sept 2013 )

BAER Disc Brakes:

• FRONT- BAER Track 4 featuring 13” rotors with 4-piston calipers, new OEM spindles, new bearings, stainless steel lines.
• REAR- BAER SS4 system featuring 12” rotors with 4-piston calipers, Emergency brake set up, braided Stainless Steel lines, new e-brake cables
• BAER proportioning valve
• GNS Proportioning valve bracket
• MCSS Vacuum brake system

Special Features: These items were done by us (GNS Performance) as this was our test bed for many products….

• Tabbed smoked headlight covers
• Custom trunk upholstery
• Smoked marker light covers
• Sequential LED Taillights (Not just bulbs either, these are actual boards with 187 LED’s)
• Amber LED front Marker/Signals (Same style as above)
• LED 3rd brake light
• Custom made emblems inside & out on the car
• Brake proportioning bracket
• Translator plus bracket
• Carbon Fiber Line-Loc bracket
• Headlight screens for both the inner headlights (For cold air entering for the intake)
• Tachometer/Alky bracket (Holds either a Tach or the Alky controller)
• Carbon Fiber radiator top plate

GM High Tech Performance - May 2011


Cover of GM G-body Performance


DSE Add car for G-Body line

[andrewb70]

Price?

[xxxturbo6]

Price?

Pretty fast with the gun there! I wasn't done editing ....

[reedld]

Wow...that car ROCKS! I love GN's....love the white! GLWS!

[subtlez28]

If I had $32k laying around, I would not hesitate. Very tasteful build!

[xxxturbo6]

Thanks for the kind words guy's..... The Only reason for selling is to start a new project otherwise I wouldn't even think about it..... The money, time, effort in this car is far north than what I'm asking, someone will get one hell of a car for the money! This car has finished 30th or so out of the last several ASCS pro-touring events which had 80+ cars entered. The driver is holding it back! LOL

[carguykeith]

Man I love this car, good luck with the sale! In case anybody doesn't think so, this is an amazing deal. I know I have north of $25k in mine doing EVERYTHING myself including paint/ body-work and this is A LOT more car!

[SS PUNISHER]

Totally worth the 32k
GLWS!

[xxxturbo6]

People like Bill Howell, Yancey Johns, Brian Finch, Danny Popp, Kyle Tucker, Doug Lutes... have all been in this car and know this car pretty well and can vouch for it if anyone is wondering who they can speak to about it..

[72BBSwinger]

That is a smoking deal, if I could I would be driving it home NOW! AND its fricken WHITE to boot!

[rayy]

What are kidneys going for these days??

[rayy]

I want this car!!!!

[xxxturbo6]

I want this car!!!!

It's here waiting on ya! LOL

[xxxturbo6]

Bump to the top....

[Scott Parkhurst]

Great deal for someone! Good luck with it Scotty!

[xxxturbo6]

Great deal for someone! Good luck with it Scotty!

Thanks Scott !!

[xxxturbo6]

Bump to the top...

[SicMonte]

Sad to see this go.......DONT DO IT!!!!!!!

This is an amazing car for the money!! (do you take payments?)

[xxxturbo6]

Open to offers!

[flyinbrian]

Good luck with the sale on this!
I've looked at your car over and over in the past, following the build, etc. because I had a GN for a brief time when I was younger and have always wanted to get one back in my hands, and yours is definitely the way I'd want to build it.
If I didn't have a '70 SS/RS Camaro with all the same Detroit Speed goodies you have in the garage, I'd be beating down your door! I just don't have room for both!
I know projects come and go, and I'm sure your ready to move on, but whoever gets it from you is LUCKY!
All the best!