Results 1 to 3 of 3
-
01-23-2014 #1
Registered User
- Join Date
- Oct 2007
- Location
- Camas, WA
- Posts
- 640
Hard line adapter for fuel injection
I have been using the tube nut sleeves for most of my fuel system but am thinking of using a ferrel style adapter on one fitting to avoid using a union. I know they are not designed for FI but do you guys think they would work for one connection? Or should I just use a tube and sleeve with a union? Here is a picture of the fitting I want to use.
-
01-23-2014 #2
Registered User
- Join Date
- Apr 2012
- Location
- Woodstock, IL
- Posts
- 2,410
Hard line adapter for fuel injection
I don't see a picture.. ?
Are you referring to like a compression type fitting that can be used on a "blank" tube?
I've used them on fuel rails before and they've held up just fine!
-DaleSchwartzPerformance
The leader in bolt-in muscle car chassis
SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram
Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more
01-23-2014 #3
Registered User
- Join Date
- Oct 2007
- Location
- Camas, WA
- Posts
- 640
I can't get the picture to load on the mobile version I guess. Thanks for the help Dale. Her is a link.
http://www.jegs.com/i/Earl's/361/AT165056/10002/-1?CAWELAID=1710586920&catargetid=1784155854&cadevi ce=m&&cagpspn=pla&gclid=COiUjOGTlrwCFUiUfgodyEkAMw
Reply With Quote
