New 69 Camaro dash from MCI

[Barrrf]

Chevelle guys left behind again. Dang.

[blonby1970]

You make a dash for any other car?
70 chevelle,nova,camaro or 65 ,Chevelle

[MCI]

Our Gen 2 dash and the 69 dash will fit in most cars with 55 to 56 inches between the a pillars. We also do custom work if you want to schedule your car in our shop.

[Barrrf]

Its not so much the entire dash I want as much as I would like the gauge carrier. Something like the Covans.......but maybe molded to accept the VHX1100 or 1200 from DD.

[MCI]

Its not so much the entire dash I want as much as I would like the gauge carrier. Something like the Covans.......but maybe molded to accept the VHX1100 or 1200 from DD.

I will take a look at that.

[Carbo]

Any install photos available yet on a first gen camaro? I did see some photos of the gauge panel but would like to see what a blank one looks like as well.

[MCI]

Any install photos available yet on a first gen camaro? I did see some photos of the gauge panel but would like to see what a blank one looks like as well.

69 interior parts.











Mike
MCI
http://www.modernclassicsinteriors.com

[Carbo]

Wow Mike that dash looks great. Is that photo above of the dash have the gauge cluster in it? It almost looks like you don't have to use a cluster. Can u just mount the gauges to the dash itself?

[MCI]

Wow Mike that dash looks great. Is that photo above of the dash have the gauge cluster in it? It almost looks like you don't have to use a cluster. Can u just mount the gauges to the dash itself?

Sure, you could mount the gauges, vent and heater controls directly on the dash without a
separate panel.

[Carbo]

Sure, you could mount the gauges, vent and heater controls directly on the dash without a
separate panel.

Mike, thanks for the photos. One more question about the dash (just trying to do my homework). Can you install the dash with the windshield in the car or does it have to be removed?

[joeelutz]

Any chance you guys would be interested in doing a dash and door panels for a 67 Chevelle? We're working on a pretty radical Chevelle and it needs a badass dash and interior. https://www.facebook.com/media/set/?...8703558&type=3

[MCI]

Any chance you guys would be interested in doing a dash and door panels for a 67 Chevelle? We're working on a pretty radical Chevelle and it needs a badass dash and interior. https://www.facebook.com/media/set/?...8703558&type=3

Sure, we would need the car in the shop to do it. Call Mike at 260-602-7651 to work out the details

[MCI]

Mike, thanks for the photos. One more question about the dash (just trying to do my homework). Can you install the dash with the windshield in the car or does it have to be removed?

The windshield does not need to be removed.

[Carbo]

The windshield does not need to be removed.

Great. I'll be calling you to place an order. Thanks again for all the responses.

[MCMLXIX]

Its not so much the entire dash I want as much as I would like the gauge carrier. Something like the Covans.......but maybe molded to accept the VHX1100 or 1200 from DD.

I also want to use the Dakota Digital VHX-1100 in my 69 Camaro. I like the Marquez design except that the gauge area should be more square than round. It would just fit the 69 Camaro better. Also, make a center pod that can house gauges, switches, HVAC controls and double din stereo; similar to the Ring Brothers Razor Camaro. The passenger side of your dash looks huge and could use a line to break up the big flat surface. (just my opinion)


Does the existing dash remain in tact under the new dash?
What about a functional glove box?

[Carbo]

I also want to use the Dakota Digital VHX-1100

I like this setup as well. Any provisions being made to the dash to accommodate this gauge panel?

[MCI]

Our custom shop can make what ever you need, we can modify our dashes our start with a new one. Custom orders have become a big part of our work. The custom orders have actually created 2 new jobs in our shop recently. I hired 2 people over the past month to keep up.
I like that gauge set too, I am sure we can make something that really stands out. If you have some ideas of your own, send me an email and we can get the process started. [email protected] or call
Mike at 260-602-7651

[Barrrf]

Quick question, what vent assemblies are you using in that dash set up?

[Carbo]

Good luck getting an answer. I don't think he is on this site anymore. I ended buying his dash and am using round vents from classic auto air. They are very similar to the ones he is using.

[Barrrf]

Good luck getting an answer. I don't think he is on this site anymore. I ended buying his dash and am using round vents from classic auto air. They are very similar to the ones he is using.

Cool. Thanks for the answer. Im guessing the hose just connects directly to the vent tube on the backside? Im asking as Im putting the covans dash in my car and dont want to cut it for the stock astrovent set up.