Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 2 of 2

    Thread: Shockwave w/UCA

    1. #1
      Join Date
      Jan 2005
      Location
      Oregon, USA
      Posts
      38

      Shockwave w/UCA

      Hi everybody,it's been awhile. I have a new project '70 Challenger,at present lots of body work has been accomplished,an IRS is being constructed for it,the engine is a 440,The front suspension required changing the K member,and I want to use the .96 torsion bars with the new air ride Technology shockwave system which is adjustable with an air bag. This lowers the front end 2 1/2",which is where I want to be.

      I would like to know if anyone has used this setup,and if so what they think of it. The problem I have run into so far is that here are very few options for the E body. This looks like an answer,but this is all uncharted water for me. Any help you can give me will be appreciated. It's nice talking to you guys. I do come out of the cave occasionally.

    2. #2
      Join Date
      Oct 2005
      Location
      Jasper,IN
      Posts
      540
      Whose front K member are you using? I though they were all setup for coilovers, eliminating the torsion bars.





    Advertise on Pro-Touring.com