JCG Wheel Stands

[Cris@JCG]

We work on setting up alot cars on my four post lifts.. We do plumbing, exhaust, sheetmetal assembly & etc... The tire some times gets in the way of doing fab work with welding & we want to keep the rims from getting damaged.. So we ended up designing some wheel stands





We are looking @ enhancing the design some more so that we can have some more uses for them..
I want to thank Ben Hermance for doing my logo & having it on file as a DXF so that we can incorporate it to some of the work we are doing around here..
Getting quotes on a CNC plasma cutter!! If I get this machine.. The sky is the limit our fab work!!

[Bundy]

I built something similar back in the spring.I'll see if I can post some pics.

[Nessumsar]

I like the fact that they are not bulky and take up a limited amount of room. Nice Cris.

[65-347]

you need to be able to put casters on the bottom to roll the car around. are you going to be selling these? if so I would be interested

[Bryce]

very cool.

I have a laser cutter at work. I add self jigging tabs to all me flat pattern designs. It looks like you did that as well.

[wellis77]

great looking piece, what are the different bolt patterns on that plate?

[Cris@JCG]

5x4.50, 5x4.75, 5x5

great looking piece, what are the different bolt patterns on that plate?

[Cris@JCG]

Looking @ getting a few people intrested in them so that I run a lot of them to keep cost reasonable.. I will let you know..

you need to be able to put casters on the bottom to roll the car around. are you going to be selling these? if so I would be interested

[MrQuick]

We work on setting up alot cars on my four post lifts.. We do plumbing, exhaust, sheetmetal assembly & etc... The tire some times gets in the way of doing fab work with welding & we want to keep the rims from getting damaged.. So we ended up designing some wheel stands





We are looking @ enhancing the design some more so that we can have some more uses for them..
I want to thank Ben Hermance for doing my logo & having it on file as a DXF so that we can incorporate it to some of the work we are doing around here..
Getting quotes on a CNC plasma cutter!! If I get this machine.. The sky is the limit our fab work!!

looks good cris....again...two steps ahead.

we have been looking at the torchmate....http://torchmate.com/resource_center/demo_videos/

[elitecustombody]

Looks like great pieces and many of us would love to have a set or two

[BOBBYA312]

Any idea on weight?

[Cris@JCG]

Weight is about 10 lbs on each stand..

[Gandalf]

Any update on these Cris?

[Sanchez Garage]

Chris are these being made?

[raustinss]

I'll make my own as I have access to a laser cutter...just to save on shipping, I would thou have no issue paying for. Pdf file or whatever format it is. Please let me know thanks
Ryan