Getting ready to paint front Subframe and susp. parts - suggestions? - 1st gen Camaro
Have all my front end parts layed out and ready for sand blast and powder coating... just wanted to see if anybody had any tips or suggestions of anything that I should do or watch out for mostly in regards to getting all the parts back and having to recut/grind somewhere because they don't fit back together right. Just want to do it right the first time.
Watch out for rust through spots
Just did the same thing to mine. Front subframe off and UCA's and LCA's off. After the sandblasting there were 2 spots that ended up as holes in the frame rails. I had to weld in some small patches before I could prime and paint. Just something to look out for, it surprised me, I wasn't prepared for the delay but dealt with it and went on.
Good Luck!