Pro-Touring.com http://www.pro-touring.com/ This is a discussion forum about Pro-Touring Cars. Camaro, Chevells, Nova, Chevy II, Cuda, Challenger, Mustang en Sun, 19 May 2013 06:55:42 GMT vBulletin 60 http://www.pro-touring.com/images/misc/rss.png Pro-Touring.com http://www.pro-touring.com/ 74 El Camino front disc brake assembly on 70 Chevelle??? http://www.pro-touring.com/showthread.php?99067-74-El-Camino-front-disc-brake-assembly-on-70-Chevelle&goto=newpost Sun, 19 May 2013 03:16:55 GMT Will 74 El Camino disc brakes fit on a 1970 Chevelle?? Can i make them work?? PS.im 17 so my pockets arent really deep enough to buy and nice disc brake conversion kit and the guy at the salvage yard wants 150$ for spindles dust covers rotors calipers and all Will 74 El Camino disc brakes fit on a 1970 Chevelle?? Can i make them work??

PS.im 17 so my pockets arent really deep enough to buy and nice disc brake conversion kit and the guy at the salvage yard wants 150$ for spindles dust covers rotors calipers and all ]]> Disc Brakes functionoverform http://www.pro-touring.com/showthread.php?99067-74-El-Camino-front-disc-brake-assembly-on-70-Chevelle viper engine http://www.pro-touring.com/showthread.php?99066-viper-engine&goto=newpost Sun, 19 May 2013 01:04:12 GMT Hey guys. I'm currently putting a 1994 dodge viper engine and t56 into my project car. I modified the factory harness and deleted the evap sensors and skip shift. I fired it up and it runs for a few seconds then shuts off. It feels like the antitheft is shutting it off. I have done lt1 and ls1 swaps but they are well documented and straight forward. Has anyone done a gen 1 swap? I'm not sure if the pcm is programmable or what I need to do to get this to stay running. the engine is all stock. Any help or phone numbers will be appreciated. ]]> andeez2go http://www.pro-touring.com/showthread.php?99066-viper-engine 2006 gto ls2 and t56 $5000 http://www.pro-touring.com/showthread.php?99065-2006-gto-ls2-and-t56-5000&goto=newpost Sun, 19 May 2013 00:34:44 GMT Pulled from 2006 gto. It's 6spd manual trans with approx 75,000 miles on engine and trans. Comes with wire harness ecu and new clutch and flywheel with less than 1,000 miles on it. Would like to get 5k located in Indiana.
Attached Images
   
]]> For Sale - Parts rage v2 http://www.pro-touring.com/showthread.php?99065-2006-gto-ls2-and-t56-5000 1966 GTO custom gauge insert http://www.pro-touring.com/showthread.php?99064-1966-GTO-custom-gauge-insert&goto=newpost Sun, 19 May 2013 00:20:42 GMT I have this made for my 1966 GTO but got Lazy and just bought a Covan set up.. 40 bucks.. Image: http://i867.photobucket.com/albums/ab237/qnitro/22615400-27F7-4B3D-919E-744C9208DB07-4705-000002BB92E29CDE_zps7706568a.jpg ... I have this made for my 1966 GTO but got Lazy and just bought a Covan set up.. 40 bucks..

]]> For Sale - Parts qnitro http://www.pro-touring.com/showthread.php?99064-1966-GTO-custom-gauge-insert Quick question for you guys about VIN and cowl tag http://www.pro-touring.com/showthread.php?99063-Quick-question-for-you-guys-about-VIN-and-cowl-tag&goto=newpost Sun, 19 May 2013 00:12:51 GMT I am looking at a 72 Chevelle and the last numbers that are on the VIN do not match any of the numbers on the cowl tag. Aren't the last 6 numbers supposed to match on each one? Also my apologies if this is in the wrong part of the forum. ]]> Restoration Central leadfoot_c5 http://www.pro-touring.com/showthread.php?99063-Quick-question-for-you-guys-about-VIN-and-cowl-tag <![CDATA[Johnny's 65 Mustang Resto Mod Pro-Touring Project]]> http://www.pro-touring.com/showthread.php?99062-Johnny-s-65-Mustang-Resto-Mod-Pro-Touring-Project&goto=newpost Sun, 19 May 2013 00:09:37 GMT First off I am a newb to this forum and I am begining my journey restoring restomodding my 65 mustang. Second I hope I have posted this in the right location. Now I will begin tear down. This car sat in a storage unit in the desert in Arizona for 4 Years and before that it sat in my garage for 2... First off I am a newb to this forum and I am begining my journey restoring restomodding my 65 mustang. Second I hope I have posted this in the right location. Now I will begin tear down. This car sat in a storage unit in the desert in Arizona for 4 Years and before that it sat in my garage for 2 years. I have finally gotten to a point in my career where I have time to do this and I can afford to do this. I also hope I can use this as a tool to make some new friends and network a little bit. I got some great ideas and maybe there someone on this forum that can help get this done.
Attached Images
                                            
]]> Project Updates 19Mustang65 http://www.pro-touring.com/showthread.php?99062-Johnny-s-65-Mustang-Resto-Mod-Pro-Touring-Project <![CDATA[ls2 and t56 what's it worth]]> http://www.pro-touring.com/showthread.php?99061-ls2-and-t56-what-s-it-worth&goto=newpost Sat, 18 May 2013 23:58:04 GMT I have and ls2 and t56 6mt that was pulled out of a 2006 gto. It comes with wiring harness ecu and brand new clutch and flywheel. Would like to know what it's worth ]]> The Marketplace rage v2 http://www.pro-touring.com/showthread.php?99061-ls2-and-t56-what-s-it-worth Front drive set up off my 1966 GTO LSX http://www.pro-touring.com/showthread.php?99060-Front-drive-set-up-off-my-1966-GTO-LSX&goto=newpost Sat, 18 May 2013 23:44:08 GMT Whats up guys, I bought a complete Wegner billet front drive for my vintage air set up, so Im selling my home made pieced together drive set up. It will include, the power steering pump/pulley billet bracket, remote resv., water pump w cross over adapter drilled into it, the alternator and bracket,... Whats up guys, I bought a complete Wegner billet front drive for my vintage air set up, so Im selling my home made pieced together drive set up. It will include, the power steering pump/pulley billet bracket, remote resv., water pump w cross over adapter drilled into it, the alternator and bracket, crank pulley and with idler pulley as well and of course the belt.. It all works, as I have drive the car around and works great.. is 450 fair?




]]> For Sale - Parts qnitro http://www.pro-touring.com/showthread.php?99060-Front-drive-set-up-off-my-1966-GTO-LSX <![CDATA[Fast and Furious.....what's the big deal??]]> http://www.pro-touring.com/showthread.php?99059-Fast-and-Furious-what-s-the-big-deal&goto=newpost Sat, 18 May 2013 23:40:52 GMT http://carsandcoffeetalk.blogspot.com/2013/05/fast-and-furiouswhats-big-deal.html *Okay......the new Fast and Furious 6 opens next weekend, check out my newest blog and let me know what you think!! Thanks, Joseph* http://carsandcoffeetalk.blogspot.co...-big-deal.html

Okay......the new Fast and Furious 6 opens next weekend, check out my newest blog and let me know what you think!!

Thanks, Joseph ]]> The Outhouse Joseph Scott http://www.pro-touring.com/showthread.php?99059-Fast-and-Furious-what-s-the-big-deal LS1, LQ6/9 front drive set up http://www.pro-touring.com/showthread.php?99058-LS1-LQ6-9-front-drive-set-up&goto=newpost Sat, 18 May 2013 23:36:52 GMT Hey Guys, I have a new set of parts I was going to use for a build, but went with a Wegner set up.. It includes a Water Pump, Crank Pulley and Detroit speed power steering pump, with Billet pulley and Billet bracket. I think I have 675 for all of it into it, I will take 400 plus shipping for all... Hey Guys, I have a new set of parts I was going to use for a build, but went with a Wegner set up.. It includes a Water Pump, Crank Pulley and Detroit speed power steering pump, with Billet pulley and Billet bracket.

I think I have 675 for all of it into it, I will take 400 plus shipping for all of it...


]]> For Sale - Parts qnitro http://www.pro-touring.com/showthread.php?99058-LS1-LQ6-9-front-drive-set-up Future Pro-Touring Mustang Checking In http://www.pro-touring.com/showthread.php?99057-Future-Pro-Touring-Mustang-Checking-In&goto=newpost Sat, 18 May 2013 23:26:33 GMT Wow first off there are some serious G Rides out on this forum. Some of you have a real talent for putting some really modern awesome accessories into the classics. My favorite is the 69 Camaro, dont yet have one but after the 65 Mustang is finished and I can find myself a 1948 to 1950 Ford F1. ... Wow first off there are some serious G Rides out on this forum. Some of you have a real talent for putting some really modern awesome accessories into the classics. My favorite is the 69 Camaro, dont yet have one but after the 65 Mustang is finished and I can find myself a 1948 to 1950 Ford F1. I will be getting me one of those. Alright I am from Texas but recently transplanted to Aloha Oregon for work and this 65 mustang I scored for a 1000 bucks back in 2005 is finally torn down. I am going to begin a long and drawn out restomod process on this bad mobil.
Attached Images
 
]]> Welcome To Our Message Board 19Mustang65 http://www.pro-touring.com/showthread.php?99057-Future-Pro-Touring-Mustang-Checking-In Konig wheels good or bad? http://www.pro-touring.com/showthread.php?99056-Konig-wheels-good-or-bad&goto=newpost Sat, 18 May 2013 23:24:51 GMT Anybody got good or bad to say about Konig wheels? I'm thinking about these in an 18x9 and 18x10 for my Trogdor Nova. The car will be mostly a track orientated car that will be street driven occasionally. Light weight wheels would be good, but for now the price is right on these.

Konig SSM Wheels-



The other option I like in this price range is FR500 Mustang style-



I can get either wheel for around $160 each. I'm leaning toward the Konigs though because they're not Mustang wheels, have a little deeper lip and look a little more like a high quality wheel. I'm open to thoughts on experience with quality or opinions...

Here's the Trogdor Nova build- http://www.pro-touring.com/showthrea...uot&highlight= ]]> SRD art http://www.pro-touring.com/showthread.php?99056-Konig-wheels-good-or-bad Pontiac motor for sale http://www.pro-touring.com/showthread.php?99055-Pontiac-motor-for-sale&goto=newpost Sat, 18 May 2013 22:17:04 GMT My buddy passed away last week end and we are trying to clear out his house. In the yard is a heavily built up poncho motor that is fill ed to the brim with go fast parts including ported heads. Not sure what the CID is but its over 455. Need it gone by Tuesday and willing to sell it for dirt... My buddy passed away last week end and we are trying to clear out his house. In the yard is a heavily built up poncho motor that is fill ed to the brim with go fast parts including ported heads. Not sure what the CID is but its over 455. Need it gone by Tuesday and willing to sell it for dirt cheap. Local pick up only in Bowie Maryland. Give me a call at 410 903 6371. I'd really hate to have to scrap this motor and would much rather see it go to good use. ]]> For Sale - Parts Thephranc http://www.pro-touring.com/showthread.php?99055-Pontiac-motor-for-sale <![CDATA[FS - Trick flow pushrods 7.45" 0.080 wall]]> http://www.pro-touring.com/showthread.php?99054-FS-Trick-flow-pushrods-7-45-quot-0-080-wall&goto=newpost Sat, 18 May 2013 22:00:04 GMT Used with about 4000 miles. They were $130 new

Offering at $80 shipped.


Product Line: Trick Flow® Chromoly Pushrods
Part Type: Pushrods, Assembled
For Use with Guideplates: Yes
Pushrod Tube Diameter: 5/16 in.
Pushrod Material: Chromoly
Top Tip Style: Ball
Bottom Tip Style: Ball
Intake Overall Length (in): 7.450 in.
Exhaust Overall Length (in): 7.450 in.
One-Piece Pushrod: Yes
Oiling: Yes
Tapered: No
Tip Attachment: Formed
Top Tip Diameter: 5/16 in.
Bottom Tip Diameter: 5/16 in.
Wall Thickness (in): 0.080 in.
Heat-Treated: Yes
Quantity: Sold as a set of 16.
Pushrods, Chromoly, Heat-Treated, 5/16 in. Diameter, 7.450 in. Length, Universal, Set of 16
Attached Images
  
]]> For Sale - Parts Donovan http://www.pro-touring.com/showthread.php?99054-FS-Trick-flow-pushrods-7-45-quot-0-080-wall lowering springs http://www.pro-touring.com/showthread.php?99053-lowering-springs&goto=newpost Sat, 18 May 2013 21:32:05 GMT i just mini tubbed my car and dont no if i should lower it 2" or 3". i dont no if i should b worried about it rubbing if i run the 3" becuase im running a 28" tall tire. if anyone has pics of 68-72 nova it would b appreicated ]]> Suspension 72nova87 http://www.pro-touring.com/showthread.php?99053-lowering-springs