JLM
08-08-2005, 07:12 AM
Does anybody have any experiance with reproduction fenders sold by either Year One or Ames Performance. After speaking with Ames they advised that the repros they sell are not of very good quality.
Does anyone have experiance with these. I'm guessing the Year One offering is likely manufactured by the same people.
My drivers side fender lower portion towards to door was completely corroded out with a hole the size of a grape fruit. The corrosion also heavily pitted and damged the structural bonded panel behind the fender skin. I was able to place a patch panel in this location, but because of the amount of welding the fender now has a large bow in it that I'm not sure I'll be completely able to work out.
Any input would be greatly appreciated. Thanks.
-Jason
Does anyone have experiance with these. I'm guessing the Year One offering is likely manufactured by the same people.
My drivers side fender lower portion towards to door was completely corroded out with a hole the size of a grape fruit. The corrosion also heavily pitted and damged the structural bonded panel behind the fender skin. I was able to place a patch panel in this location, but because of the amount of welding the fender now has a large bow in it that I'm not sure I'll be completely able to work out.
Any input would be greatly appreciated. Thanks.
-Jason