Rick D
11-10-2012, 01:07 PM
Ok guys I have some other things I want to do. I have a line on a couple of different trucks and just don't want to move it to storage. So I'm dropping the price NEW PRICE $9200.00
Ok guys here goes.
As most know I've had the car for sometime now, and most of the hard work has been completed or will be finished before it goes to the new owner(that is if someone wants it https://static1.pt-content.com/images/pt/2006/06/lol-1.gif )*
I have a few things going on in every day life (new things at work and boys*
B-ball for my sons fith grade team) so before I put the car back in storage https://static1.pt-content.com/images/pt/2007/08/rolleyes1-1.gif I thought I'd see if anyone was looking for a project?
Here's what I have: 1969 RS Camaro I have most of the parts for the car like all the small stuff (window regs handles) you get what I mean. I have all the RS stuff but the vacuum parts. Not much for the interior other then the rear seat, nice dash pad and stock gauge housing.*
The original parts of the car are as follows, floors-inside and trunk, front fenders (GM RS) need very little work on the bottoms. GM cowl hood, upper and lower valences. Trunk lid, inner RS fenders in epoxy. All the inner sheet metal is org to the car.
What's new: roof, both qtr's, rear body panel, rear window filler panel, both doors. The *qtr's and inner structure have been coated with e-coat and spray able sound deadener.
The car has DSE mini tubs installed 15.5 inches on both side from inner tub to outer qtr lips. Frame has been reinforced on the inside.*
Basically I have a complete shell ready for body work, all metal has been installed for will be within the next week or two. it is mounted to a cart to move and work on.*
The front sub frame has been all welded up and smoothed with metal, still needs the DSE upper coil over brackets installed, I may install these if I have time.
It's a very nice starting point if you are looking for a project to work on.
It does not have any rear suspension, I was going with DSE q-link but have not bought it yet. So you can go with what ever setup you want still.
Other parts that I have but not installed are DSE frame connectors, DSE firewall fill plate. I have a few other parts that can be included for the right deal?
The only issue with the car which isn't an issue but some may not want it because of it is the vin. The car was a theft recovered car back in the 70's and when the car was found it was missing the vin tag. At that point it had a state vin attached to it. The hidden vins are still both there so you know it is an org Camaro. I have an IL title for the car so you don't have to worry about getting it titled or registration, on the title it shows the vin number that is attached to the dash.
This is NOT a fire sale I do not have to sell it. I am willing to trade also (no bikes, boats, or pool tables) yes I had someone want to trade a pool table for it sometime ago.
I'm not looking for everyone to tell me that projects are not selling very good or what they thinks it's worth, not trying to be a d**k but I see a lot on the forms. A lot of you know me and I'm not trying pass off something it's not.
So what do I want for it, $10,500.00 is what I'm asking, I'm open to offers but send me your number and we can talk about it.
As for trades I'm open to something that runs or maybe just needs a drive line?? Try me you never know, the worst I can say is no.
Just to list a few trades I would be interested in:
Chevy C10 pickup 60's to early 70's
Nova 62 to 67 or??
Chevelle 64 to 70
2nd gen Camaro
Or??????
Here are a couple of pictures, from these you can get an idea of what I have. If you are interested please pm me or email me at r<dever>[email protected]
Remove the aeros and replace the two with a 2, And we can talk about it, I am a very reasonable person.
If you are really interested in the car please pm or email and I will get back to you. I have lots of pictures that I send you the link to, but only if your serious about the car.
Thanks for checking out my ad guys https://static1.pt-content.com/images/pt/2007/09/cheers-1.gif https://static1.pt-content.com/images/pt/2009/10/lateralg-1.gif
https://static1.pt-content.com/images/pt/2012/11/60e38da1d80edadffb852b9e282510e3-1.jpg
https://static1.pt-content.com/images/pt/2012/11/f69742f9ab420611c3b25dab8038f022-1.jpg
https://static1.pt-content.com/images/pt/2012/11/DSC04221-1.jpg
https://static1.pt-content.com/images/pt/2012/11/DSC04240-1.jpg
Ok guys here goes.
As most know I've had the car for sometime now, and most of the hard work has been completed or will be finished before it goes to the new owner(that is if someone wants it https://static1.pt-content.com/images/pt/2006/06/lol-1.gif )*
I have a few things going on in every day life (new things at work and boys*
B-ball for my sons fith grade team) so before I put the car back in storage https://static1.pt-content.com/images/pt/2007/08/rolleyes1-1.gif I thought I'd see if anyone was looking for a project?
Here's what I have: 1969 RS Camaro I have most of the parts for the car like all the small stuff (window regs handles) you get what I mean. I have all the RS stuff but the vacuum parts. Not much for the interior other then the rear seat, nice dash pad and stock gauge housing.*
The original parts of the car are as follows, floors-inside and trunk, front fenders (GM RS) need very little work on the bottoms. GM cowl hood, upper and lower valences. Trunk lid, inner RS fenders in epoxy. All the inner sheet metal is org to the car.
What's new: roof, both qtr's, rear body panel, rear window filler panel, both doors. The *qtr's and inner structure have been coated with e-coat and spray able sound deadener.
The car has DSE mini tubs installed 15.5 inches on both side from inner tub to outer qtr lips. Frame has been reinforced on the inside.*
Basically I have a complete shell ready for body work, all metal has been installed for will be within the next week or two. it is mounted to a cart to move and work on.*
The front sub frame has been all welded up and smoothed with metal, still needs the DSE upper coil over brackets installed, I may install these if I have time.
It's a very nice starting point if you are looking for a project to work on.
It does not have any rear suspension, I was going with DSE q-link but have not bought it yet. So you can go with what ever setup you want still.
Other parts that I have but not installed are DSE frame connectors, DSE firewall fill plate. I have a few other parts that can be included for the right deal?
The only issue with the car which isn't an issue but some may not want it because of it is the vin. The car was a theft recovered car back in the 70's and when the car was found it was missing the vin tag. At that point it had a state vin attached to it. The hidden vins are still both there so you know it is an org Camaro. I have an IL title for the car so you don't have to worry about getting it titled or registration, on the title it shows the vin number that is attached to the dash.
This is NOT a fire sale I do not have to sell it. I am willing to trade also (no bikes, boats, or pool tables) yes I had someone want to trade a pool table for it sometime ago.
I'm not looking for everyone to tell me that projects are not selling very good or what they thinks it's worth, not trying to be a d**k but I see a lot on the forms. A lot of you know me and I'm not trying pass off something it's not.
So what do I want for it, $10,500.00 is what I'm asking, I'm open to offers but send me your number and we can talk about it.
As for trades I'm open to something that runs or maybe just needs a drive line?? Try me you never know, the worst I can say is no.
Just to list a few trades I would be interested in:
Chevy C10 pickup 60's to early 70's
Nova 62 to 67 or??
Chevelle 64 to 70
2nd gen Camaro
Or??????
Here are a couple of pictures, from these you can get an idea of what I have. If you are interested please pm me or email me at r<dever>[email protected]
Remove the aeros and replace the two with a 2, And we can talk about it, I am a very reasonable person.
If you are really interested in the car please pm or email and I will get back to you. I have lots of pictures that I send you the link to, but only if your serious about the car.
Thanks for checking out my ad guys https://static1.pt-content.com/images/pt/2007/09/cheers-1.gif https://static1.pt-content.com/images/pt/2009/10/lateralg-1.gif
https://static1.pt-content.com/images/pt/2012/11/60e38da1d80edadffb852b9e282510e3-1.jpg
https://static1.pt-content.com/images/pt/2012/11/f69742f9ab420611c3b25dab8038f022-1.jpg
https://static1.pt-content.com/images/pt/2012/11/DSC04221-1.jpg
https://static1.pt-content.com/images/pt/2012/11/DSC04240-1.jpg