bardwell81
09-03-2011, 01:45 PM
Hello All!
I've been checking out the forum and getting some very useful info from you all. Actually based on your reviews I went ahead and purchased the SpeedTech A-Body Track Time Suspension Package. I initially was only going to do the front end and brakes, but decided to just do it all at one, minus the brakes. Jay Weir was a pleasure to work with and kept me informed on shipping time. I believe my wait was about 4 weeks. Please forgive the bad pictures (and rusty parts). She's far from being show worthy but I wanted...no needed to ride! Sorry I didn't take measurements before the work began. Nothing special yet, 454 yanked out of a 1977 Yukon, TH400 trans, 10 bolt posi (gears unknown), BF Goodrich 255/60/15 front, 275/60/15 rear.
http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=186/category_id=247/home_id=-1/mode=prod/prd186.htm
Here is before
49034
front End
49041
49039
49044
49043
49042
Rearend
49038
49045
49036
49046
49048
49047
Final Product
49049
49050
Easily 3 inch drop. Stock spindles. I'm going to bring the rear up a little. Ride is greatly inproved already. Next up, 18 in wheels and larger brakes Most likely Corvette brakes, I'm still undecided on base model vs Z06. Any one have experience with the Tukon/tahoe brake kit like CPP sells or should I just stick with Corvette? I appreciate all comments and suggestions.
I've been checking out the forum and getting some very useful info from you all. Actually based on your reviews I went ahead and purchased the SpeedTech A-Body Track Time Suspension Package. I initially was only going to do the front end and brakes, but decided to just do it all at one, minus the brakes. Jay Weir was a pleasure to work with and kept me informed on shipping time. I believe my wait was about 4 weeks. Please forgive the bad pictures (and rusty parts). She's far from being show worthy but I wanted...no needed to ride! Sorry I didn't take measurements before the work began. Nothing special yet, 454 yanked out of a 1977 Yukon, TH400 trans, 10 bolt posi (gears unknown), BF Goodrich 255/60/15 front, 275/60/15 rear.
http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=186/category_id=247/home_id=-1/mode=prod/prd186.htm
Here is before
49034
front End
49041
49039
49044
49043
49042
Rearend
49038
49045
49036
49046
49048
49047
Final Product
49049
49050
Easily 3 inch drop. Stock spindles. I'm going to bring the rear up a little. Ride is greatly inproved already. Next up, 18 in wheels and larger brakes Most likely Corvette brakes, I'm still undecided on base model vs Z06. Any one have experience with the Tukon/tahoe brake kit like CPP sells or should I just stick with Corvette? I appreciate all comments and suggestions.