Speedtech Guldstrand

[Ishmael]

Did anybody keep a link to where Frank did the Guldstrand mod with a set of Speedtech uppers by lowering them and redrilling? I'd like to know exactly how much to lower / where to redrill.
thanks
Scott

[ProdigyCustoms]

It is about 1 1/4", We push it down as far as it will go and still rest flush with the mount.

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

[Ishmael]

I should have just asked you. So just push it straight down as long as it is flat against the mount and I would assume evenly spaced from the original holes on both sides? No science to this that I could potentially screw up?
thanks again,
Scott

[67rally]

Looks like its down and back a little.

[BuzzKillian]

Check out David Pozzi's web site. (http://www.pozziracing.com/first_gen_suspension_geome.htm#Re-located upper mount) He has some very interesting theories on the First Gen handling.