johnnymac46
06-02-2011, 04:25 PM
I am test fitting my Tri-4bar on my 68 Camaro.
I've gotten the old rails out of the way and raised the AME into place. The rear of clip is up against the rear valance without having the rear caps in place. As I continue to jack the rest of the clip into place the front of the Clip is hitting on the floor pan where it drops down into the rear foot area.
Also the bend in the rails looks too far forward to line up with the floor pan.
My first thought was to trim the rear of the rails 1/2" to give it the needed clearance and make up for it with the rear cap.
I just figured I would ask before I start cutting into a piece of Artwork.
I hope the pics help
Any Help is greatly appreciated
https://static1.pt-content.com/images/pt/2011/06/P6030343-1.jpg
https://static1.pt-content.com/images/pt/2011/06/P6030342-1.jpg
https://static1.pt-content.com/images/pt/2011/06/P6030339-1.jpg
https://static1.pt-content.com/images/pt/2011/06/P6030338-1.jpg
I've gotten the old rails out of the way and raised the AME into place. The rear of clip is up against the rear valance without having the rear caps in place. As I continue to jack the rest of the clip into place the front of the Clip is hitting on the floor pan where it drops down into the rear foot area.
Also the bend in the rails looks too far forward to line up with the floor pan.
My first thought was to trim the rear of the rails 1/2" to give it the needed clearance and make up for it with the rear cap.
I just figured I would ask before I start cutting into a piece of Artwork.
I hope the pics help
Any Help is greatly appreciated
https://static1.pt-content.com/images/pt/2011/06/P6030343-1.jpg
https://static1.pt-content.com/images/pt/2011/06/P6030342-1.jpg
https://static1.pt-content.com/images/pt/2011/06/P6030339-1.jpg
https://static1.pt-content.com/images/pt/2011/06/P6030338-1.jpg