PDA

View Full Version : stock pedals or aftermarket for 6 speed in 68 camaro



justasquid
07-13-2010, 01:53 AM
I am getting closer and closer to pulling the trigger on my build. Its going to consist of an ls-1 and a 6 speed. My question comes down to this:

My car is an original automatic, so I have purchase a set of pedals anyway. do I buy a set of original pedals for a 68 camaro? Or do I fab up to fit the pedals from the donor car? Or, is there a set of aftermarket pedals that would work better for me?

I've seen master cylinders that are made to fit the orignal pedals, so I am assuming this would be the easiest route to take, since the pedals will bolt right up.

Any input will be greatly appreciated.

MCMLXIX
07-13-2010, 03:22 AM
stock it the least expensive... needs a little work to fit the hyro clutch
Clayton Machineworks has the nicest stock replacement pedals... I belive they have provisions for the hydro setup
Wilwood or Tilton are race ready but will require a good amount of fab work....

https://www.pro-touring.com/forum/showthread.php?t=56307&highlight=clayton