Fesler Billet 1969 Camaro Billet Trunk Hinges Shipping Now

[Fesler built]

SO we finally finished the 1967-69 Chevy Camaro billet trunk hinge with a strut so they will hold your trunk lid up in the wind. With this set up you get everything you need to install them and remove the stock trunk springs.

You have to cut the trunk hinge pin off the stock hinge and drill one hole for the new ball stud and done, it takes about an hour to install with taping and proteching your trunk area. Comes with template to locate the lower ball stud mounting hole for the strut.

https://static1.pt-content.com/images/pt/2008/10/Img0179-2.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0175-2.jpg
https://static1.pt-content.com/images/pt/2008/10/Img0176-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img01801-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img01802-1.jpg
https://static1.pt-content.com/images/pt/2008/10/Img01803-1.jpg

[ods dan]

these will fit 67-68 also??

[Fesler built]

these will fit 67-68 also?? yes correct fits the three years

[Steve1968LS2]

Sweet.. tired of my trunk lid hitting me in the head! lol

[redfire69]

Very nice! :cool:

[J2speedandcustom]

Chris,

What's the cost and when can we get a couple of sets??? I'll order 2 sets right now.

Thanks
Jeff

[Fesler built]

Chris,

What's the cost and when can we get a couple of sets??? I'll order 2 sets right now.

Thanks
Jeff

They are $299 raw and $339 finished (polished, brushed or anodized). Comes with everything you need to install. You can order them today and they will be shipping next week.

[redfire69]

Put me down for a polished set - thanks! Ron

[DarkoNova]

Those look identical to the 68-74 Nova hinges. Any idea if they'll work on those cars? If so, I'm down for a set.

Matt

[Fesler built]

Those look identical to the 68-74 Nova hinges. Any idea if they'll work on those cars? If so, I'm down for a set.

Matt

They are close but not the same we are working on them now for Nova, 2nd Gen Camaro, Chevelles and Mopar so we will have a lot of applications very soon.

[beep4beep]

those are beautiful no dought but hurry up on the mopar stuff PLEASE.:twothumbs

[DarkoNova]

They are close but not the same we are working on them now for Nova, 2nd Gen Camaro, Chevelles and Mopar so we will have a lot of applications very soon.

Awesome, when the Nova ones are ready, I'll be your first customer! :smoke:

Matt

[cluxford]

Chris,

I've just been to your website to order a set. They don't appear (unless I am going blind).

How do I order these ?

Oh and I desperately need 68 standard tail light surrounds...I am over waiting for Marquez...I have had an order in for over 9 months.

Rgds
Chris

[BMF Machine]

KilleR~

[Blkmamba Nova]

I am like you DarkoNova do they work on the Nova

[Fesler built]

I am like you DarkoNova do they work on the Nova

We are building NOVA right now should be out by SEMA

[Fesler built]

Chris,

I've just been to your website to order a set. They don't appear (unless I am going blind).

How do I order these ?

Oh and I desperately need 68 standard tail light surrounds...I am over waiting for Marquez...I have had an order in for over 9 months.

Rgds
Chris

Give us a few days we are working on getting everything in the system, its taking a little longer. They will be shipping next week and we are working on the lights as well so check back after SEMA

[CRead01]

I gotta say I havn't seen any other companies out there that are comin out with so many cool products as you.

let us know when the second gen ones are ready.

[Fesler built]

those are beautiful no dought but hurry up on the mopar stuff PLEASE.:twothumbs

We are on Mopar, just finished the 68 Charger hood hinges and they will be shipping in a few weeks. Doing final fitment now, working on tail lights, trunk hinges and a few other small parts. possibly markers for those that dont shave them?

[Fesler built]

I gotta say I havn't seen any other companies out there that are comin out with so many cool products as you.

let us know when the second gen ones are ready.

In the works and you guys will be the first to know.

[Mr.VENGEANCE]

I gotta say I havn't seen any other companies out there that are comin out with so many cool products as you.

let us know when the second gen ones are ready.


co-signed

[redfire69]

Hi Chris, quick question on these, how about adjusting the lid to the hinges (or the hinges themselves)? Its hard to tell the size of the holes from the pics. Thanks again - Ron

[beep4beep]

the hinges on early chargers 68-70 are the same as 68 -70 roadrunner. let me know when you have the second set ready please.:twothumbs

[Fesler built]

the hinges on early chargers 68-70 are the same as 68 -70 roadrunner. let me know when you have the second set ready please.:twothumbs

Yes they will be ready very soon. I will post a pic up in a day or two for you to see.

[DarkoNova]

Awesome, and maybe some Duster stuff next? :headbang:

Matt

[NorwayCharger]

What are the status on the 68-70 Charger hinges?
I am very interested.
Any pic´c ??

[Damn True]

I'm usually not at all into billet shiny things, but those are cool. I like the design.....but I think I'd have to paint 'em.

[notchbackgta]

let us know when the second gen ones are ready.
+1 I would like these soon. Ill be hanging rear sheet metal on my 71 soon

[SPOTT]

Anything for a 67-68 mustang?

[esenior]

Sorry to reply to such an old thread, but was about to order a set of billet trunk hinges for my Camaro when I saw the note on the convertibles. So will the current hinges available fit a 69 ragtop?