View Full Version : crank trigger coil per cylinder system
08-19-2008, 01:59 AM
Has anyone ever gone distributorless on a BB Mopar? I have most of it figured out (trigger kit, coils, ignition box, harness, etc), except what to do about capping off the dist hole. The only thing I can come up with is to butcher off the bottom half of a dist and retaining the shaft and gear to run on the cam. I have surfed til the wheels fell off to find someone who makes such an animal. Any suggestions would be appreciated
08-22-2008, 09:43 AM
Yes, Scroll down to to the post titled "Driving the oil pump after converting to Distributorless Ignition." This conversion is for a 455 Pontiac that I am converting to the Ford EDIS.
08-23-2008, 04:06 PM
I know my boss has a wedge motor in his race car, and it has some kind of plug in place of the distributor.
Does the distributor drive the oil pump on a Mopar? If so you might need to keep some of those components.
Powered by vBulletin® Version 4.2.1 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.