protour73
05-20-2008, 11:55 AM
I am looking for someone with a similar setup as mine. Hotchkis small block front coil springs, Global West upper and lower control arms. ZZ4 engine w/ aluminum heads and intake, aluminum pulleys and brackets, steel 2" cowl induction hood, and protouring f-body aluminum subframe bushings in the stock configuration.
Problem is, these springs advertise a certain amount of drop (live and learn), I have one full coil removed (the max recommended by hotchkis) and I still have at least 3" between the lip of the wheelwell and the top of my 255/40-17 front wheel/tire combo. NOT the lowered look I was going for......... I cannot remove anymore from the coils, as this will adversely affect the spring rate (600#).
thanks in advance,
Scott :banghead:
Problem is, these springs advertise a certain amount of drop (live and learn), I have one full coil removed (the max recommended by hotchkis) and I still have at least 3" between the lip of the wheelwell and the top of my 255/40-17 front wheel/tire combo. NOT the lowered look I was going for......... I cannot remove anymore from the coils, as this will adversely affect the spring rate (600#).
thanks in advance,
Scott :banghead: