PDA

View Full Version : 1st Gen Camaro LCA's



Turbo67camaro
05-09-2008, 08:20 PM
I was under the impression that there aren't any 1st gen. camaro lower control arms that offer revised geometry.

Well apparently, I was not fully informed.

Marcus at SC&C worked with the manufacturer of his upper control arms to develop LCA's with revised geometry. Call him for the details. They are available, but not shown on his website, which is my reason for posting this.

DSE's lowers advertise additional positive caster, so theirs is apparently not stock geometry as well.

Whether or not this revised geometry is an improvement or not is for people with more experience than me to say.