69Myway
01-07-2005, 06:07 AM
I FINALLY updated my website with the most recent progress. Right now I am working out all the kinks in the wiring, etc. As soon as I wrap up the gauges I am moving to the front chassis harness (lights/blinkers), then a/c line connections, body fitment, exterior body work, then it all comes apart for jam paint...etc.
http://mcspeed.homestead.com/69_Camaro_Resurrection.html
If you look through the last set of photos you can see how I squeezed the 1996 Caprice gas tank into the car. I have some final details to do there, but it is pretty much done. I ran a 2 5/8" fuel gauge in the center of the dash cluster. I really didn't want to run an aftermarket dash cluster as they look too much like kit car parts to me. This allows me to use the stock blinker lights, high beam, etc. I am wiring the check engine light into the stock idiot light section as well.
So far so good, just TONS of work!
http://mcspeed.homestead.com/69_Camaro_Resurrection.html
If you look through the last set of photos you can see how I squeezed the 1996 Caprice gas tank into the car. I have some final details to do there, but it is pretty much done. I ran a 2 5/8" fuel gauge in the center of the dash cluster. I really didn't want to run an aftermarket dash cluster as they look too much like kit car parts to me. This allows me to use the stock blinker lights, high beam, etc. I am wiring the check engine light into the stock idiot light section as well.
So far so good, just TONS of work!