PDA

View Full Version : Regional Shops



TonyL
02-19-2007, 12:03 AM
Here's where we want you to post the shops you recommend or don’t recommend in your region. Please post info about where the shop is, who to contact there, and why you would or wouldn’t recommend it.

Think of all the vendors you’ve come to know in your area, Body shops, painters, interior shops, fabrication shops, powder coaters, chrome shops, junk yards that specialize in our type cars etc.

Thanks!

bigblocktech
02-21-2007, 02:00 PM
I would personally recommend some friends of mine. Their names are Robert & Lesa Spradley. They own and operate a Novus Auto Glass business in Lincolnton, NC. They also offer classic restorations, automotive wiring, aftermarket AC installation, custom fabrication, and more. You can reach them at 704-214-4115.

I have known the Spradley's for over 10 years now and I've seen several vehicles that Robert and Lesa have owned and built that were top-notch. Robert has done TPI swaps, LT1 swaps, T56 swaps, etc. He has the knowledge and experience to perform stock and custom mechanical work, autobody, paint, electrical, and can also point you in the right direction for anything that he can't personally do. They're good honest people.

Mr.VENGEANCE
02-21-2007, 03:54 PM
thanks!..

69rs
02-21-2007, 07:35 PM
David Sloan (dtouring on this site) owns www.roadkillerkustoms (http://www.roadkillerkustoms) in Canton. Paint and body (they did paint and body on II Much), ground up resto, modifications, fabrication, etc. Excellent work at reasonable prices and they specialize in pro-touring. Plus they're good folks!

Alan66ss
02-22-2007, 05:47 AM
Great shop and real easy to work with. He has brought my Chevy II back from the dead. If you need to see any pics - I will gladly provide.

Alan

69rs
02-22-2007, 04:45 PM
Great shop and real easy to work with. He has brought my Chevy II back from the dead. If you need to see any pics - I will gladly provide.

Alan
Yeah, but who can trust you?!? You do happen to be right THIS time! :screwy:

Mr.VENGEANCE
02-22-2007, 04:58 PM
um... please no internal beef in here guys..

lest you splain and i can get the popcorn ready.. hhahahahah

Alan66ss
02-22-2007, 06:45 PM
Jim,

Trust me? :smoke: Hey did you get a second date with the nice young lady you were with the other day? Good money says no.

Alan

See ya in a couple of weeks. Ordered up the rearend and had it shipped to Davids.

69rs
02-22-2007, 08:29 PM
Jim,

Trust me? :smoke: Hey did you get a second date with the nice young lady you were with the other day? Good money says no.

Alan

See ya in a couple of weeks. Ordered up the rearend and had it shipped to Davids.
Well, that wasn't really a first date, so technically no. However, Bob asked me to go with him to a car collection open house and she went with me.

DarKnight
02-27-2007, 09:58 AM
You're welcome to check out our website at eurotechiii.com .
We specialize in european repair, detailing, paint, and body.

Of course we also do full restoration on the classics and any of our other services are available also. Our personal favorite is performance upgrades of course and we have the experiance to help others in that department.

tomspo04
05-11-2007, 05:18 AM
I had my car done at "The Classic Chassis" Fayetteville, NC. What an ABORTION! Do not go there!!!! The owner talked a great show, the website looks good, but that's about it. I left my car there for 7 months and got back a car with a bad paint job and horrible body/panel work. I've got the car in another shop now and it's costing me twice as much to reverse the BS work that Classc Chassis did. What an idiot!

HOTRODSHOP
01-14-2009, 08:53 PM
The Hot Rod Shop in Forest City,NC

We do ground up frame off restorations on classic and muscle cars,fab work,hang sheetmetal,suspensions,and show quality body and paint work, will work on all vehicles but specialize in camaros.
small shop,great work,

[email protected]
828-289-6628
Mark Dorsey

Zyman
10-03-2009, 07:36 AM
Does anyone have a recommendation for an engine builder-tuner in the Atlanta area, preferably north? I have to believe there is a reputable one near Braselton. I would like someone that knows Pontiac motors.

The subject is a stock 1970 YS block 400 with number 13 heads. My goals are at least 400 HP, and 500 lb ft of torque at the rear wheels. The motor is currently stock.

Thanks

David Conrade
01-17-2010, 06:34 PM
Does anyone have a recommendation for an engine builder-tuner in the Atlanta area, preferably north? I have to believe there is a reputable one near Braselton. I would like someone that knows Pontiac motors.

The subject is a stock 1970 YS block 400 with number 13 heads. My goals are at least 400 HP, and 500 lb ft of torque at the rear wheels. The motor is currently stock.

Thanks
T&L engine develope.they do great work.it does take a little while.I sugggest a written contract on time .very detailed in everthing they do ,just over extended.
They are on the web

David

LS1MonteSS
07-15-2010, 07:24 PM
Tony,
How about some pic's of your car!??... Seriously!

71duster
07-18-2010, 11:33 AM
i used B-rods or Custom to get some stuff done on my duster a couple years ago. THEY SUCK! talk a good talk,but unless you are building a six figure car,they will treat yours like a POS!

quick89
09-16-2010, 05:33 PM
here in the dfw area of Tx i would suggest Texas Racewerks they know what they are doing they are a chassis shop they build all out drag cars to your everyday drivers and performance shop they can handle your needs
i know for sure the guy that does the ls swaps there has done a several ls swaps in all types of cars
the chassis guy is a bad ass what he does as well all around a very good shop and prices are very reasonable
69 camaro ls3 t56 swap
72 impala ls3 4l60 e swap
2003 350z ls3 t56 swap
1983 gmc 1500 ls based 5.3 swap
they have built numerous pro mods 10.5 cars
thats just to name a few
Texas Racewerks
817-377-2790
3700 Reagan Dr. Bldg b
FortWorth Tx 76116

Snake Eater
11-12-2010, 05:34 PM
tomspo, I got screwed by them as well and I know of about 8 others that have had problems with the Classic Chassis and Brian Clark. Last I heard they are bankrupt and were living off of the deposits on the new cars coming in, ie no money to finish previous paid for jobs. Quite a few folks are out some big time cash.

BulldawgMusclecars
02-27-2011, 05:24 PM
Anyone looking for good quality machine work, and custom engine builds (non-LS), call Kyle at Chastain Engines in Jonesboro Ga (770) 478-7780. He's especially good with Pontiac engines.

I own a full service shop in Acworth, GA, and we do anything from stock restorations to full-custom rebuilds. Check out our website for more info.

firewood
11-09-2011, 03:15 PM
I had my car done at "The Classic Chassis" Fayetteville, NC. What an ABORTION! Do not go there!!!! The owner talked a great show, the website looks good, but that's about it. I left my car there for 7 months and got back a car with a bad paint job and horrible body/panel work. I've got the car in another shop now and it's costing me twice as much to reverse the BS work that Classc Chassis did. What an idiot!

Is that the shop right off the square in downtown?

EDIT: nope, it isn't.

chuckd71
01-05-2012, 12:11 AM
Stark Performance in Cross Plains TN is kind of out of the way but Stark himself is a standup guy who cleaned up the mess someone else had created. Carpenter's Upholstery near Murfreesboro TN is run by another stand up guy with great prices and good work on interiors and convertible tops. Neither of these places are super convenient compared to some other shops, but I guess that keeps the overhead low. I plan to go back to both places in the future if I run out of time and can't finish the car myself before I start school.

BMR Sales
02-08-2012, 09:06 AM
Just thought I'd chime in about a great performance suspension company located in Tampa FL.... :yeah: We are always excited to meet any of the members that take a road trip to our shop!

oldsmobeast72
02-24-2013, 03:13 PM
Street and strip performance in louisville ky. 502-969-1500. Great guys, good prices. I highly recommend them.

Raw Untamed
10-22-2013, 04:55 PM
Anybody have any recommendations for body work near Memphis, TN? I have a Challenger that needs a few things.

coachtek
04-08-2014, 06:29 PM
Hotrod Revolution in cumming Georgia is a SCAM!! deal with them at your own risk!! i lost 7500$ dealing with them and ive met a cpl people with the same story

Tom Welch
10-22-2014, 07:41 AM
I'll plug MY shop, the one I OWN an operate, just so everyone that reads this understands. We are 3 GUYS GARAGE, located in Garden City, GA, we have associations with several other shops in the area for paint, body and interior which we don't do. Our reputation can be found on the web and specifically at Angie's List. We have been fortunate to have worked on cars valued at upwards of a million dollars, an original 64 Shelby Cobra for one, as well as several other antique and classic cars. We do the tuning and work to my 2009 Z06, too. We don't claim to do it all, but I know enough people that are reputable to help you get what you are after. One in particular is David Kuhn Restorations. A real high end restoration/modification shop. Check them out yourself. We support the hobby through car show sponsorships, and we sometimes sponsor individual cars in SCCA events. our current projects include a 65 Malibu SS, a 69 Nova ls swap, 67 Firebird ls swap, and a 66 big block corvette.

5spd540
11-02-2014, 04:44 PM
I'll plug MY shop, the one I OWN an operate, just so everyone that reads this understands. We are 3 GUYS GARAGE, located in Garden City, GA, we have associations with several other shops in the area for paint, body and interior which we don't do. Our reputation can be found on the web and specifically at Angie's List. We have been fortunate to have worked on cars valued at upwards of a million dollars, an original 64 Shelby Cobra for one, as well as several other antique and classic cars. We do the tuning and work to my 2009 Z06, too. We don't claim to do it all, but I know enough people that are reputable to help you get what you are after. One in particular is David Kuhn Restorations. A real high end restoration/modification shop. Check them out yourself. We support the hobby through car show sponsorships, and we sometimes sponsor individual cars in SCCA events. our current projects include a 65 Malibu SS, a 69 Nova ls swap, 67 Firebird ls swap, and a 66 big block corvette.
Man I need to come check out your shop one day. I work 5 mins from your shop. I always see cool cars there.

piratebaseball
11-09-2014, 12:41 PM
Screaming Performance in Titusville, FL is a stand up shop that basically does everything. I highly recommend them if you are in the area.

Tom Welch
11-12-2014, 11:56 AM
come by any time, be glad to show you around.

5spd540
11-15-2014, 06:03 PM
come by any time, be glad to show you around.

Cool I am off on Monday I will swing by then. Is your name tom?

Tom Welch
11-26-2014, 11:04 AM
Sorry I didn't answer sooner, yes my name is Tom, Stop by anytime.

Kotacars
07-13-2017, 09:55 AM
Kota Kars Speed & emgineering,LLC wiring, mechanicals and chassis/suspension woodstock GA 4046730148

Hybrid 69
01-06-2021, 04:05 AM
Any other input for the SE, finally getting back to my project and want to find a good shop. Need suspension, metal fab, wiring, paint / body, performance LS upgrades so just about everything, ha. I’m located near Panama City, FL but willing to travel.

camuchi
03-13-2021, 08:42 PM
Any other input for the SE, finally getting back to my project and want to find a good shop. Need suspension, metal fab, wiring, paint / body, performance LS upgrades so just about everything, ha. I’m located near Panama City, FL but willing to travel.


Greg Tope , owner of Retired Rides in Pelham Alabama just south of Birmingham. Great guy
impeccable quality standards. Awesome builds

http://www.retiredrides.com/

TANKMASTERJ
08-29-2021, 11:02 AM
D and D Specialty Cars Van Buren Arkansas.
Dale and Stacy Downs own it. Many many deep pocket customs in there shop. I only had them do some sheet metal such as custom hood vents I purchased on PTF from Frank V. Everything else was strip car, repair rust around windshields front and back, and the paint job.
I personally did the floor , frame rails, mini tub, and trunk floor. I also Installed my speedtech front and rear along with roll cage etc before going to D and D.
Although with any shop you could nitpick or complain of this or that. They are a good shop with very high standards. I think I had no idea going in the cost. And when I saw what I thought was poor systematic approach or organization costing me I was disgruntled. But in there defense they are used to people dropping off there ride with a very very deep pocket and picking up it completed. I was trying to do all I could myself to save cost.
Like many of you starting expecting to build a car for X budget, 100k 150k or whatever. ( I started with a car I had 50 in and thought another 75 would do it.) Not even close. Live and Learn.
My own not having a well executed plan and list on the front was my own doing.
They did an OUTSTANDING job on metal work and paint work.
My biggest complaint was items like them stripping the car at significant cost when you could media blast for a fraction of the cost. Only reason I say that is I am a water tower construction business and and we abrasive blast everything so I can speak from personal experience.
Or when they stripped and blasted the car they didn't do the inside of the doors. ( I should have had the written plan) Or rear quarters which I sanded down and coated when I got it home.
Again I don't believe I communicated exactly what I expected and they weren't used to a guy not just going all the way but stopping them at certain points saying this is good enough or let's cut here or there whatever.
The shop owner told me on the front end he doesn't like to media blast cars except for door jambs and windshield channels and hard to strip areas because of warping and sand everywhere but that he would go as little or as far as I wanted to go with the building. And they do allow you to hit it hard for a month or two and take a break financially before getting back on it.
The stripping just cost about 5 times what I expected. ( Like 13 or 14 grand) . They even stripped the back side of fenders and hoods and valances, stuff you could abrasive blast far cheaper. Again not the shop fault but my lack of knowledge.
I'm staying all of this not to bash D and D any way at all.
PLEASE HEAR ME! I'm saying all this to praise them for attention to detail, and that there methods of thoroughly doing every little phase has got them where they are today and that for all of you going in on the front end just make a list of wants, NEEDS expectations, BUDGET and then quiz the shop extensively and write those answers of communication down and STICK to your plan. After those interviews WRITE your plan down and give to the shop and then you both communicate and modify as time goes on.
I DIDN'T DO THIS. I communicated with them via phone, text, email, and we never had any disagreements what so ever I just didn't have a well thought, well written plan.
I see now how important that is.
Scope CREEP. Is everyone's enemy on these car builds.
This shop won't give you an estimated price but only charges 50.00 per hour Labor plus Parts. Very cheap as far as hourly rates are concerned.
Shop is VERY clean and organized. From chassis, wiring, custom leather, flush mount, build you headers, whatever they are very capable.
. I've been to several LS fests. Many car shows, auction, etc. I've seen very few builds that top the quality of D and D Specialty.
D and D Specialty Cars Van Buren Arkansas to 479-474-1114.

Gonzostyle
01-27-2022, 12:09 PM
Realized this is "southern states" part of regional shops. I will move to more appropriate thread

I have a few projects that I want to work through and just don't have the time to do body and paint right now. I am in Northern CA, looking for a body shop recommendation in the N. CA, Southern OR, Reno NV area. I don't mind traveling a bit for a good shop.

Thanks,
-Jeremie

JustJohn
01-27-2022, 01:21 PM
These guys are working on my paint in Spartanburg SC right now: https://elitecustoms.net/

Open door policy and have built a few show quality cars over the years. They work several projects simultaneously and I see progress every time I stop by. Not cheap.

FORDvsCHEVY
01-28-2022, 06:07 PM
Wicked Fabrications Auburn Wa. The look like they do quality work but quoted me 9-15k to put in a full ridetech shockwave system…. I’m guessing they just didn’t want to do it.