View Full Version : ATS vs. BMR t-56 install kit
D Rock
11-20-2005, 09:55 AM
www.bmrfabrication.com/f1.htm
www.t56kit.com/site.html
Which one would you guys go with and why?? I am basically looking for the most cost effecient way as I am on a budget.
I know ATS posts on this site so if you guys would like to explain what makes your guys kits better that would be great. Thanks
Derek
Hurst - Jeff
11-20-2005, 10:00 AM
ATS because I completely trust them and they make quality parts.
I do not know of the other company.
D Rock
11-20-2005, 10:17 AM
I know BMR is a honest company, i'm not worried at all about that. They are pretty well known with the 4th gens.
MuscleRodz
11-20-2005, 11:17 AM
I would go with ATS in that they give you EVERYTHING you need to do the install thus the difference in cost. BMR kit looks like an ATS copy to me.
https://static1.pt-content.com/images/noimg.gif
BMR is a site sponsor too.
TitoJones
11-20-2005, 02:37 PM
We sell our stuff (minus our modded hydraulics) to BMR. You are getting the same kit either way, but the BMR one requires welding, and ours is a bolt in.
Tyler
D Rock
11-20-2005, 07:07 PM
Oh ok. So are the modded hydraulics a required thing or what. I'm not too sure I understand them. I have my T-56 with everything, just need a flywheel and a kit.
Derek
TitoJones
11-20-2005, 07:11 PM
We modify the pushrod on the hydraulic master cylinder to be adjustable and bolt to the stock 1st gen pedals.
BMR gives you an offset bracket that you weld on to the pedal to connect a stock hydraulic master to. We like all our products to be a bolt on affair.
Tyler
Stu Seitz
11-20-2005, 08:58 PM
Got the ATS kit, if I had to build my camaro over agian I'd buy it agian.
D Rock
11-28-2005, 05:03 PM
Thanks for the info guys.
Powered by vBulletin®