PDA

View Full Version : 4L60e forward clutch assembly.



Motorhead
11-19-2005, 08:26 AM
Hey ya'll,
I'm rebuilding a friends 4L60e, and while assembling the forward clutch pack I noticed that it is different than the 700r4. My question is does a friction clutch go next to the wavy steel or does a steel plate go next to the wavy steel. When I took it apart it had a steel in this position, and normally I would install it back this way but this is where the problem was the first time. I looked in my ATSG manual for the 700r4 and it has a friction in this position. I know GM was continuiously upgrading this trans throughout the 90's and I don't know if this was one of the upgrades or not. Any help ya'll can give will be greatly appreciated.


Thanks ya'll

mini69
11-19-2005, 08:45 AM
there is normally a flat steel on top of the wavy on the forward clutch unit.the frictions should go on top of a flat steel.

Motorhead
11-19-2005, 08:47 AM
Thanks mini69!:icon996: